Vszerda
Vszerda CY-U3-084-EF USB 3.0 19/20Pin to USB 3.1 Type E Adapter with SATA Power Cable 0.6m
Converts a motherboard USB 3.0 19/20-pin header to a USB 3.1 Type E header with a 0.6 m SATA power cable for front-panel devices
- TypeUSB 3.0
- Connector TypeUsb 3.0 20pin 19pin
- Cable Length0.6
- Length0.6
- Connector DetailUsb 3.0 20pin 19pin
- ConstructionCopper
- Converts motherboard 19/20-pin header to USB 3.1 Type E for front-panel connectivity
- Supports 5 Gbps super-speed transfer, ten times faster than USB 2.0
- Enables simultaneous two-way data transmission for efficient file moves
- Shock-resistant copper construction protects signal integrity during handling
- Includes 0.6 m SATA power cable to supply connected devices
Front-panel USB 3.0 header adapter
This Vszerda adapter converts a motherboard USB 3.0 19/20-pin header into a USB 3.1 Type E header while adding a SATA power cable for devices that need extra current. It targets PC builders who want to connect modern front-panel ports or internal hubs to an older header without rewiring the case. The copper construction is rated shock-resistant for durability inside a chassis. Data runs at up to 5 Gbps with simultaneous two-way transmission.
Upgrading from USB 2.0 front-panel links
The jump is worth it when your case or accessory uses a USB 3.1 Type E connector but the board only offers the legacy 19/20-pin host header. USB 3.0 delivers roughly 10 times the throughput of USB 2.0, so large file transfers to external drives or high-speed card readers finish noticeably faster. The included SATA power lead removes the current limit that often causes port drops on bus-powered hubs. No driver installation is required on any recent Windows or Linux release.
Check header keying and clearance before ordering
Verify that your motherboard header follows the standard 19/20-pin keying; some OEM boards use a proprietary layout that will not mate. Measure the space behind the motherboard tray — the adapter PCB plus the SATA power plug needs enough depth to sit flat without stressing the solder joints. Ensure your power supply has a free SATA connector for the auxiliary lead. This adapter does not add ports; it only changes the header type, so you still need a compatible front-panel device or hub.
Highlights
- Converts motherboard 19/20-pin header to USB 3.1 Type E for front-panel connectivity
- Supports 5 Gbps super-speed transfer, ten times faster than USB 2.0
- Enables simultaneous two-way data transmission for efficient file moves
- Shock-resistant copper construction protects signal integrity during handling
- Includes 0.6 m SATA power cable to supply connected devices
Specifications
| Brand | chenyang |
|---|---|
| Model | CY-U3-084-EF |
| Type | USB 3.0 |
| Connector Type | Usb 3.0 20pin 19pin |
| Cable Length | 0.6 |
| Length | 0.6 |
| Connector Detail | Usb 3.0 20pin 19pin |
| Construction | Copper |
| Features | shock-resistant |
Questions about this item
Does the 0.6 m cable reach a front-panel USB 3.1 Type E header from a standard ATX board?
The 0.6 m length is designed for typical front-panel routing in ATX cases; measure your specific board-to-panel distance before buying.
Which way round do the 19-pin and 20-pin plugs go, and do I need the SATA power lead?
Match the keyed 19-pin or 20-pin connector to the motherboard header, then attach the SATA power cable to a drive power connector for stable operation.
Will the copper conductors or shock-resistant jacket degrade if I remove the adapter later?
Copper conductors and the shock-resistant jacket are rated for repeated mating cycles; no scheduled replacement is required under normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



