We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cable with Mini SAS 26-pin SFF-8088 male plug splitting to four SATA 7-pin female connectors, 1 metre long

Vszerda

Vszerda CS0006 Mini SAS 26Pin SFF-8088 Male to 4 SATA 7Pin Female 1M

SKU CH-9RV8-68NF4

Connects an external Mini SAS 26-pin SFF-8088 controller to four SATA drives at 3.0 Gbps over 1 metre

  • Typemini sas
  • ColorMini SAS 8088 to 4x SATA
  • Length1
  • Connector DetailMini Sas, Sata
  • Terminal GenderMale-to-Female
  • Speed3 gigabits_per_second
  • Connects one SAS controller to four SATA drives
  • SFF-8088 male plug with release ring locks securely
  • 0 Gbps transfer rate for high-throughput storage
  • 1 metre length suits standard rack layouts
  • Copper conductors maintain signal integrity over distance

Mini SAS to 4 SATA cable

The Vszerda FBA_CS0006 connects an external Mini SAS 26-pin SFF-8088 male port to four 7-pin SATA female connectors. It uses copper conductors and is rated for 3.0 gigabits per second. The one-metre length suits rack or direct-attach layouts. Storage builders needing a single controller link to multiple drives will find it fit for purpose.

Replaces multi-cable breakout sets

This single assembly replaces four separate SATA cables and a separate Mini SAS lead, cutting clutter and potential failure points. The jump is worth it when a controller exposes only the SFF-8088 interface but the backplane or drives present standard SATA ports. Installations that already run native SATA host ports gain no advantage from adding this adapter.

Sustained throughput at rated speed

The cable maintains the specified 3.0 Gb/s per lane under continuous transfer loads typical of backup or archive workloads. Signal integrity is preserved by the fixed-length copper run and the locking release ring on the Mini SAS plug. No active equalisation or repeater circuitry is present, so performance scales directly with the host controller capability.

Highlights

  • Connects one SAS controller to four SATA drives
  • SFF-8088 male plug with release ring locks securely
  • 0 Gbps transfer rate for high-throughput storage
  • 1 metre length suits standard rack layouts
  • Copper conductors maintain signal integrity over distance

Specifications

BrandVszerda
ModelCS0006
Typemini sas
ColorMini SAS 8088 to 4x SATA
Length1
Connector DetailMini Sas, Sata
Terminal GenderMale-to-Female
Speed3 gigabits_per_second
ConductorCopper
Featuresno

Questions about this item

What clearance does the 26-pin SFF-8088 male plug with release ring need at the controller port?

The external Mini SAS 26Pin (SFF-8088) male plug includes a release ring, so allow enough space at the controller port to grip and depress the ring when disconnecting.

Which end connects to the controller and which end connects to the drives during installation?

Connect the SFF-8088 male plug to the Mini SAS host or controller, then attach the four 7-pin SATA female connectors to the SATA target drives or backplane.

Will the copper conductors support speeds beyond 3.0 Gb/s if I upgrade the controller later?

The cable is specified for 3.0 Gb/s Mini SAS performance; higher speeds would require a cable rated for that bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.