Vszerda CPU EPS 8-pin to dual PCIe 8-pin splitter cable 8 inches 18AWG

EPS-to-PCIe splitter for GPU power

This Vszerda cable converts a single CPU EPS 8-pin header on a power supply into two PCIe 8-pin (6+2) connectors for graphics cards. Each 18AWG copper conductor run measures eight inches, keeping the wiring tidy inside compact chassis. The female EPS end plugs into the PSU's CPU power lead while the two male PCIe ends attach directly to the graphics card. It is intended solely for GPU supplementary power.

Suits builders adding a second GPU connector

The adapter suits anyone whose PSU lacks enough native PCIe leads but has a spare EPS port, letting them power a compatible Radeon or other 6-pin or 8-pin graphics card. It will not work with motherboards; connecting it to a motherboard EPS socket will damage the board. Buyers needing a native PCIe-to-PCIe splitter or additional EPS headers for the motherboard should look at a different cable.

Steady delivery through 18AWG copper

Under sustained load the 18AWG copper conductors maintain consistent current flow to both PCIe ends without the voltage sag seen in thinner wire. The short eight-inch length minimises resistance, so the cable runs cool even when the graphics card draws continuous power. Proper seating of the 6+2 pins ensures reliable contact during extended gaming or compute sessions.