Vszerda
Vszerda CPU cooling fan for HP Pavilion X360 14-DH 14-DH1036TX 4-wire 4-pin L51102-001
Replacement CPU cooling fan with four-wire connector for HP Pavilion X360 14-DH series laptops, includes thermal paste
- Brand-new replacement fan restores original cooling performance
- Four-wire 4-pin connector matches the motherboard header exactly
- Compatible with Pavilion X360 14-DH 14-DH1036TX series laptops
- Supplied without heatsink for direct swap into existing assembly
- Thermal paste included so installation is ready out of the box
Replacement CPU Fan for Pavilion X360 14-DH
This Vszerda replacement CPU cooling fan is built for HP Pavilion X360 14-DH series laptops including the 14-DH1036TX model. It arrives new and includes a small tube of thermal paste for the installation. The part is sold without a heatsink so the original module must be reused.
4-Wire 4-Pin Connector Matches L51102-001
The single specification that determines fit is the 4-wire lead terminating in a 4-pin connector that matches part number L51102-001. Buyers must remove the existing fan and verify the part number and connector layout before ordering because the compatibility list is a reference only.
Direct Replacement Restores Standard Cooling
As a direct mechanical and electrical match the fan restores the laptop's original airflow and thermal performance under normal workloads. Power draw and acoustic profile remain identical to the factory unit when the old heatsink is cleaned and fresh paste is applied correctly.
Highlights
- Brand-new replacement fan restores original cooling performance
- Four-wire 4-pin connector matches the motherboard header exactly
- Compatible with Pavilion X360 14-DH 14-DH1036TX series laptops
- Supplied without heatsink for direct swap into existing assembly
- Thermal paste included so installation is ready out of the box
Specifications
No published specifications for this item yet.
Questions about this item
What does the 4-wire, 4-pin connector mean once the fan is installed in my Pavilion X360 14-DH?
The four-wire, four-pin connector carries power, ground and a PWM speed-control signal so the laptop's firmware can vary the fan speed automatically based on CPU temperature.
Does the 4-pin interface limit the fan to a fixed voltage or speed range in practice?
No — the PWM line lets the system adjust the fan from idle to full RPM, so the connector itself does not cap the operating range.
What must I check on the old fan to confirm this part will fit my 14-DH1036TX?
Remove the existing fan and verify the part number L51102-001 matches, then compare the mounting screw holes and connector orientation against the product photos.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



