We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda CPU 8Pin Female to 2 Male 4+4Pin Y Splitter 18AWG 20CM

SKU CH-8K1A-S1D9H

Splits one CPU 8-pin connector into two 4+4-pin plugs using 18AWG wire over 20cm

  • Splits one CPU 8-pin into two 4+4-pin connectors
  • 18AWG wire gauge handles high current loads
  • 20 cm length fits compact chassis builds
  • Y-splitter design powers dual CPU sockets from single PSU

Dual CPU power adapter for redundant EPS connections

This Y-splitter converts a single 8-pin CPU power socket on a power supply into two 4+4-pin male plugs, allowing two motherboard EPS headers to be fed from one source. The cable uses 18AWG conductors and measures 20 cm in length, making it suitable for compact builds or dual-socket workstation boards that require auxiliary CPU power.

Builders needing two EPS feeds from one PSU output

It suits system integrators populating both CPU power headers on a dual-socket board or adding a secondary EPS connection for extreme overclocking. Users whose power supply already provides multiple native 8-pin CPU cables, or who only need a single EPS connection, will not require this splitter.

Highlights

  • Splits one CPU 8-pin into two 4+4-pin connectors
  • 18AWG wire gauge handles high current loads
  • 20 cm length fits compact chassis builds
  • Y-splitter design powers dual CPU sockets from single PSU

Specifications

No published specifications for this item yet.

Questions about this item

Will this splitter reach my CPU power socket if the PSU is bottom-mounted?

The cable is 20 cm long, so measure from your PSU to the motherboard 8-pin header; it suits compact builds but may fall short in full-tower cases.

Can I run this alongside an existing 4-pin CPU cable on the same motherboard?

Each male end is a 4+4-pin connector; plug the half that matches your board's 4-pin or 8-pin header and leave the other half disconnected.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.