We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black enclosure with side switch and SATA connector

Vszerda

Vszerda Combo M.2 B-Key & mSATA to SATA 3.0 Drive Enclosure with Switch

SKU CH-WP10-QA55C

A 2-in-1 enclosure converts a B-key M.2 or mSATA SSD to SATA 3.0 with a manual switch for single-drive operation

  • Converts M.2 B-key or mSATA SSDs to SATA 3.0 for easy drive upgrades
  • Physical switch selects between M.2 and mSATA — only one operates at a time
  • Accepts B-key and B/M-key M.2 NGFF SSDs, not M-key models
  • M.2 slot takes priority when both drives are fitted
  • Supports SATA revision 3.2 and 3.3 V DC power for compatible drives

2-in-1 M.2 B-Key & mSATA to SATA 3.0 Enclosure

The Vszerda adapter enclosure accepts one M.2 NGFF B-key or B/M-key SSD and one mSATA SSD, converting either to a standard SATA 3.0 interface. A physical switch selects which drive is active. The M.2 slot takes priority when both slots are populated. It supports SATA revision 3.2 and 3.3 V drives.

Suits builders adding legacy SATA SSDs

This enclosure fits users with B-key NGFF or mSATA drives who need a SATA connection. It does not support M-key only NGFF SSDs. The switch prevents simultaneous operation, so the unit cannot serve two drives at once. Buyers needing concurrent dual-drive access or M-key compatibility should consider other options.

M.2 keying and switch operation

The adapter works exclusively with B-key or B/M-key NGFF SSDs and rejects M-key only modules. Inserting both drive types makes the M.2 drive the primary device, disabling the mSATA slot until the switch is toggled. This keying restriction is the decisive specification for drive compatibility.

Highlights

  • Converts M.2 B-key or mSATA SSDs to SATA 3.0 for easy drive upgrades
  • Physical switch selects between M.2 and mSATA — only one operates at a time
  • Accepts B-key and B/M-key M.2 NGFF SSDs, not M-key models
  • M.2 slot takes priority when both drives are fitted
  • Supports SATA revision 3.2 and 3.3 V DC power for compatible drives

Specifications

No published specifications for this item yet.

Questions about this item

Does this enclosure accept both 2280 and 2242 M.2 B-key drives?

The adapter works with B-key or B/M-key NGFF SSDs; M-key SSDs are not supported.

How do I switch between an installed mSATA drive and an M.2 B-key drive?

Use the onboard switch to select the active drive; both cannot operate simultaneously and the M.2 slot takes priority if both are inserted.

Will I need to replace the enclosure if I upgrade to a 3.3 V SATA SSD later?

The enclosure already supports DC 3.3 V MSATA and NGFF SSDs, so a compatible 3.3 V SATA drive will work without a new case.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.