Vszerda
Vszerda CBL-SAST-0956 OCuLink SFF-8611 to U.2 SFF-8639 4 Pin Power Cable 100cm
Connects an OCuLink SFF-8611 host to a U.2 SFF-8639 NVMe drive with integrated 4-pin power over 100 cm
- TypeSerial
- ColorCopper
- Connector DetailU.2 Nvme
- Terminal GenderMale-to-Female
- Speed1.33 gigabits_per_second
- ConductorCopper
- OCuLink SFF-8611 (x4) to U.2 SFF-8639 with 4-pin power expands storage options
- 100 cm length gives flexible routing inside the chassis
- Copper conductors deliver 1.33 Gb/s data throughput
- Male-to-female terminals ensure a secure, direct connection
- High-speed serial design supports NVMe SSD performance
Connection Interface
The Vszerda CBL-SAST-0956 is a copper cable assembly that links an OCuLink SFF-8611 x4 port to a U.2 SFF-8639 device with an integrated 4-pin power connection. It spans 100cm and carries data at 1.33 gigabits per second for storage expansion.
Target Builder
This cable suits builders adding U.2 Nvme drives to a board or controller that exposes an OCuLink SFF-8611 x4 interface and can supply auxiliary power through the 4-pin lead. It is not for systems that only offer SATA or eSATA ports, nor for U.2 drives that require a separate power cable because the onboard supply is absent.
Deciding Specification
The single specification that decides fit is the OCuLink SFF-8611 x4 to U.2 SFF-8639 connector pairing with integrated 4-pin power; if your host connector or drive power arrangement differs, this assembly will not connect.
Highlights
- OCuLink SFF-8611 (x4) to U.2 SFF-8639 with 4-pin power expands storage options
- 100 cm length gives flexible routing inside the chassis
- Copper conductors deliver 1.33 Gb/s data throughput
- Male-to-female terminals ensure a secure, direct connection
- High-speed serial design supports NVMe SSD performance
Specifications
| Brand | Vszerda |
|---|---|
| Model | CBL-SAST-0956 |
| Type | Serial |
| Color | Copper |
| Connector Detail | U.2 Nvme |
| Terminal Gender | Male-to-Female |
| Speed | 1.33 gigabits_per_second |
| Conductor | Copper |
| Features | High Speed |
Questions about this item
How can I confirm the Vszerda CBL-SAST-0956 cable is working correctly after connecting it?
After setup, the attached U.2 NVMe drive should appear in your system BIOS or operating system drive list and transfer data at the rated 1.33 gigabits per second without errors.
What connectors and accessories are included with the Vszerda CBL-SAST-0956 cable, and what must I source separately?
The package contains the 100 cm copper cable assembly with an OCuLink SFF-8611 (x4) male connector on one end and a U.2 SFF-8639 female connector with integrated 4-pin power on the other; you must provide the host controller with an OCuLink port and the U.2 drive itself.
Which version of the Vszerda CBL-SAST-0956 should I choose for my storage expansion?
The CBL-SAST-0956 is a single 100 cm copper assembly rated at 1.33 gigabits per second, terminating in OCuLink SFF-8611 (x4) to U.2 SFF-8639 with 4-pin power; select it when that exact connector pairing and length match your chassis layout.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115015BTC
In stock
