We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square metal cooling fan with black grille, 225 by 225 by 80 mm

Vszerda

Vszerda C22S23HKBD00 225×225×80 mm 230 V 83/93 W cooling fan

SKU CH-9JR6-0C40R MPN C22S23HKBD00

Metal cooling fan measuring 225×225×80 mm, running on 230 V at 83/93 W

  • Delivers strong airflow with 83/93 W motor
  • Fits standard 225×225×80 mm mounting spaces
  • Runs directly on 230 V mains supply
  • All-metal frame resists vibration and wear
  • Ready to install as a brand-new unit

All-Metal 230 V Cooling Fan

The Vszerda C22S23HKBD00 is an all-metal cooling fan rated for 230 V mains supply. It measures 225×225×80 mm and draws 83 W at one speed and 93 W at the other. The unit arrives new in its original box.

Suited for Fixed 230 V Installations

This fan suits equipment builders and maintenance teams who need a 230 V AC fan in the 225 mm square footprint. It is not for low-voltage DC systems, battery-powered projects or installations that require PWM speed control.

Dual-Power Airflow for Enclosure Cooling

At 83 W the fan provides steady airflow for moderate heat loads; at 93 W it delivers extra headroom for higher dissipation. The fixed two-speed design means output cannot be varied beyond those two points.

Highlights

  • Delivers strong airflow with 83/93 W motor
  • Fits standard 225×225×80 mm mounting spaces
  • Runs directly on 230 V mains supply
  • All-metal frame resists vibration and wear
  • Ready to install as a brand-new unit

Specifications

No published specifications for this item yet.

Questions about this item

What mains voltage must my site supply for the 230 V 83/93 W fan to run?

The unit is rated for 230 V AC mains; connect it to a circuit that delivers that voltage.

Will the 225×225×80 mm metal frame line up with the mounting holes on my existing 225 mm square cut-out?

Yes, the 225 mm by 225 mm footprint matches the same square cut-out pattern used by earlier 225 mm fans.

How can I confirm the 83/93 W motor is spinning correctly after wiring it up?

Apply 230 V power and verify the blades rotate steadily; the nameplate shows 83/93 W draw at full speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.