We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-inch adapter cable with 4-pin female and 8-pin male connectors, 18AWG copper wires

Vszerda

Vszerda ATX 4 Pin P4 to EPS 8 Pin Power Adapter Cable 6 inch 18AWG

SKU CH-9SWK-6ZZAC

Converts a 4-pin ATX CPU power connector to an 8-pin EPS motherboard socket using 18AWG copper conductors in a six-inch length

  • Converts a 4-pin PSU plug to an 8-pin motherboard CPU socket
  • 18AWG copper conductors deliver stable 12V power to the CPU
  • Compact 6-inch length keeps cable routing tidy inside the case
  • Female P4 to male EPS connectors ensure a secure, keyed fit
  • For motherboard CPU power only — not for graphics cards

What this adapter does

The Vszerda ATX 4 Pin P4 to EPS 8 Pin Power Adapter Cable converts a power supply's 12V 4-pin female connector into an 8-pin male EPS connector for a motherboard CPU socket. It is built with 18AWG copper conductors and measures 6 inches in length. The black and yellow cable is intended for internal desktop builds where the PSU lacks a native 8-pin CPU power lead.

Power delivery limits

This adapter only rearranges the existing 12V lines from the 4-pin source; it does not increase the current the PSU can supply. The 18AWG wires are rated for the standard ATX 12V specification, but the total power remains capped by the original 4-pin connector and the power supply's own 12V rail capacity. It cannot be used to feed an 8-pin graphics card connector, as doing so would exceed the adapter's design limits and risk damage.

Installation notes

The 6-inch length keeps cable routing short inside compact cases, but it also restricts placement flexibility between the PSU and the motherboard CPU socket. Ensure the PSU's 4-pin female P4 connector is fully seated before attaching the 8-pin male end to the board. A loose fit on either side can cause intermittent power delivery or prevent the system from posting.

Highlights

  • Converts a 4-pin PSU plug to an 8-pin motherboard CPU socket
  • 18AWG copper conductors deliver stable 12V power to the CPU
  • Compact 6-inch length keeps cable routing tidy inside the case
  • Female P4 to male EPS connectors ensure a secure, keyed fit
  • For motherboard CPU power only — not for graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

Which connector variant matches my PSU and motherboard?

This cable converts a 12 V ATX 4-pin P4 female from the PSU into a 12 V 8-pin EPS male for the motherboard.

What does the 18 AWG rating mean for my build?

18 AWG copper conductors carry the CPU 12 V current safely over the short 6 inch run.

Will the 4-pin to 8-pin adapter limit power delivery on the EPS socket?

The adapter passes the same 12 V rail through; the motherboard still receives up to the PSU's 4-pin rated current.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.