We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ATX 24-pin male to dual female splitter cable with sleeved wires

Vszerda

Vszerda ATX 24Pin 1 To 2 Splitter Extension Cable

SKU CH-DWR2-56549

Splits one 24-pin ATX connector into two female ports for powering dual devices from a single PSU

  • Splits one 24-pin PSU connector into two female ports
  • Extends reach of the motherboard power cable for easier routing
  • Male-to-female design keeps the original PSU plug intact
  • Supports standard ATX 24-pin power delivery

ATX 24-Pin Dual-Splitter Cable

This ATX 24-pin splitter takes a single power-supply connector and provides two female ports, letting builders run dual 24-pin loads from one PSU. It suits test benches, dual-system chassis or custom loop setups that need an extra motherboard power tap without a second supply.

Male-to-Female Wiring For Direct Use

The male end plugs straight into the PSU while each female end accepts a standard 24-pin motherboard or extension cable, so no adapters or re-pinning are required. Builders who need more than two 24-pin connections or who require isolated ground planes for sensitive measurements should look elsewhere.

Highlights

  • Splits one 24-pin PSU connector into two female ports
  • Extends reach of the motherboard power cable for easier routing
  • Male-to-female design keeps the original PSU plug intact
  • Supports standard ATX 24-pin power delivery

Specifications

No published specifications for this item yet.

Questions about this item

Does the 24-pin ATX splitter carry the same pinout as a standard motherboard power connector?

Yes, the male plug and both female sockets follow the standard 24-pin ATX pinout, so each connected device receives the correct voltage and ground arrangement.

How much clearance should I allow behind the motherboard tray for the 24-pin male plug and two female sockets?

The male plug and each female socket sit flush with a standard 24-pin header; allow enough depth for the cable bend radius plus the connector body so the splitter does not press against the case panel.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.