Vszerda
Vszerda ATX 24(20+4)-Pin to 18-Pin + 10-Pin Extension Cable 24-Inch
24-inch ATX 24-pin extension splits into 18-pin and 10-pin connectors for compatible Seasonic modular PSUs using 18AWG UL 1007 wire
- Extends motherboard reach with 24-inch length
- Fits Seasonic M12II Evo 520, 620, 650, 750, 850W units
- UL 1007 18AWG wire handles high current safely
- Black protective sleeves shield cables and improve airflow
- 24-pin ATX splits to 18-pin plus 10-pin modular connectors
ATX 24-Pin to Dual 18+10 Pin Extension
This 24-inch extension cable converts a standard ATX 24(20+4)-pin connector into separate 18-pin and 10-pin plugs for compatible Seasonic modular power supplies. It uses UL 1007 18AWG wire wrapped in black protective sleeves. The 60cm length provides flexibility for routing in larger cases or custom builds.
Replaces Short Stock Cables on Listed Units
The extension is designed for Seasonic M12II Evo Series units including 520, 620, 650, 750 and 850 watt models. It also fits X-650 KM3, X-750 KM3, X-850 KM3, X-1050XM2, X-1250XM2, SS-660XP2, SS-760XP2, SS-860XP2, SS-1050XP3, SS-1200XP3, Snow Silent 750, Snow Silent 1050, Focus Plus Gold and Focus Plus Platinum series. Use it when factory cables are too short for your layout.
Suits Builders With Compatible Seasonic PSUs
This cable suits builders who own one of the listed Seasonic power supplies and need extra reach for the main motherboard power connection. It is not for users with other PSU brands or non-modular units, as the 18-pin and 10-pin ends are specific to Seasonic's modular interface. Buyers without a matching unit should look elsewhere.
Highlights
- Extends motherboard reach with 24-inch length
- Fits Seasonic M12II Evo 520, 620, 650, 750, 850W units
- UL 1007 18AWG wire handles high current safely
- Black protective sleeves shield cables and improve airflow
- 24-pin ATX splits to 18-pin plus 10-pin modular connectors
Specifications
No published specifications for this item yet.
Questions about this item
Does the 24-inch length clear a full-tower case from PSU to motherboard?
The cable is 24 inches (60 cm) end to end, measured from the PSU-side connectors to the ATX 24-pin plug, so it spans most full-tower routes without tension.
How do I match the 18-pin and 10-pin plugs to my Seasonic modular sockets?
Align each keyed plug with its labelled Seasonic socket — 18-pin to the 18-pin port, 10-pin to the 10-pin port — and press straight in until the latch clicks; forcing a rotated plug bends pins.
When should I inspect or replace the 18 AWG wires and black sleeves?
Check the UL 1007 18 AWG conductors and sleeves whenever you rebuild or after any PSU swap; replace the cable if insulation shows cracks, discoloration, or melted spots.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



