We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 25 cm adapter cable with a 4-pin Corsair RGB plug on one end and a standard 3-pin 5 V ARGB socket on the other, black PVC jacket

Vszerda

Vszerda ARGB 5V 3Pin Adapter Cable 25cm

SKU CH-3DZH-0GSW8 GTIN 7666540381356

Connects Corsair 4-pin RGB to standard 5 V 3-pin ARGB devices with a 25 cm PVC cable

  • Selling Unit1, Count
  • Size/Dimensions25 cm
  • Maximum Voltage5 volts_of_direct_current
  • Color/FinishAs described
  • Color MappingAs described
  • Item Count1
  • Connects Corsair RGB fans to standard 5 V ARGB headers
  • 25 cm cable length fits tight chassis routing
  • 7-wire PVC construction delivers stable signal transmission
  • Supports LL120 controller integration for unified lighting control
  • Single adapter cable simplifies mixed-vendor RGB setups

Vszerda ARGB 5V 3-Pin Adapter Cable

This 25 cm adapter converts a Corsair RGB 4-pin header to a standard ARGB 3-pin 5 V connector. It lets enthusiasts and gamers connect non-Corsair ARGB devices to a Corsair controller. The cable uses PVC insulation and carries seven wires for signal and power delivery.

Thermals noise and power draw

As a passive cable it generates no heat and produces no audible noise during operation. Power draw is limited to the 5 V ARGB devices attached downstream. The short 25 cm length keeps voltage drop minimal for typical case layouts.

Bundled accessories and software

The package includes only the single adapter cable; no additional cables, mounting hardware or configuration software are supplied. Users must provide their own ARGB components and controller to complete the lighting setup.

Highlights

  • Connects Corsair RGB fans to standard 5 V ARGB headers
  • 25 cm cable length fits tight chassis routing
  • 7-wire PVC construction delivers stable signal transmission
  • Supports LL120 controller integration for unified lighting control
  • Single adapter cable simplifies mixed-vendor RGB setups

Specifications

BrandXAGMODSHN
Model7666540381356
Selling Unit1, Count
Part NumberXAGMODSHN
Size/Dimensions25 cm
Maximum Voltage5 volts_of_direct_current
Color/FinishAs described
Color MappingAs described
Item Count1
Typecomputer-usb-cables
Featurescalculator
ColorAs described
Number of Wires7

Questions about this item

How do I connect the 4-pin Corsair RGB header to the 3-pin 5V ARGB header using this 25 cm adapter?

Align the keyed notch on the 4-pin Corsair plug with the controller header, then press the 3-pin end onto the motherboard ARGB header matching the 5V, data and ground pins; the 25 cm length reaches most mid-tower routing paths.

What upkeep does the PVC-jacketed 7-wire cable need over time?

Inspect the connectors for dust or bent pins every few months; wipe with a dry anti-static brush and reseat if the ARGB lighting flickers — no lubrication or scheduled replacement is required.

At what point does the 5 V supply limit become noticeable on a long LL120 chain?

Voltage drop appears first when total LED current approaches the motherboard header rating, typically around 2 A; symptoms are dimming or colour shift at the far end of the chain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.