Vszerda
Vszerda AM202NEW KVM switch 4K@30Hz 2.0
Dual-monitor HDMI KVM switch lets two computers share two displays, keyboard, mouse and four USB 2.0 ports at up to 3840 x 2160 at 30 Hz with push-button or wired switching
- TypePush Button
- PC SelectionPush Button
- Power Features5 volts
- Dimensions10.18 in x 6.48 in x 1.19 in
- Weight0.621 kilograms
- Controls two PCs across two monitors with one keyboard and mouse
- Copy or extend desktop modes via Windows+P shortcut
- Push-button and wired remote switching for instant PC selection
- Four USB 2.0 ports share printers, scanners and peripherals
- 4K at 30 Hz resolution with USB-powered plug-and-play operation
Dual-monitor KVM for two PCs
The Vszerda AM202NEW lets one keyboard, mouse and dual-display setup control two computers. It supports copy mode to mirror the primary screen and extend mode to span windows across both monitors after a Windows-P display setting. Four USB 2.0 ports share peripherals such as printers or scanners alongside the console devices.
Passive USB-powered thermal profile
The unit draws 5 volts from the attached USB cables and requires no external power adapter. With no active cooling the switch runs silently and adds negligible heat to a desk. Power consumption stays within the USB 2.0 budget so normal operation does not strain laptop or desktop ports.
Replaces single-monitor or software KVMs
Users moving from a single-display switch gain a second monitor without extra cables. The hardware button and wired remote replace hot-key-only solutions that can conflict with applications. Mac environments are not recommended due to compatibility limits, so buyers needing macOS support should look elsewhere.
Highlights
- Controls two PCs across two monitors with one keyboard and mouse
- Copy or extend desktop modes via Windows+P shortcut
- Push-button and wired remote switching for instant PC selection
- Four USB 2.0 ports share printers, scanners and peripherals
- 4K at 30 Hz resolution with USB-powered plug-and-play operation
Specifications
| Brand | Vszerda |
|---|---|
| Model | AM202NEW |
| Part Number | AM202NEW |
| Type | Push Button |
| PC Selection | Push Button |
| Power Features | 5 volts |
| Dimensions | 10.18 in x 6.48 in x 1.19 in |
| Weight | 0.621 kilograms |
Questions about this item
How do I install the AM202NEW KVM switch and what is the step people often miss?
Connect both PCs using the supplied USB cables and two HDMI cables per computer, then press Windows + P on each PC to set copy or extend mode before switching.
What maintenance or replacement will the AM202NEW need later?
The switch is powered by the USB cables from the connected PCs, so there is no external adapter to replace; only the cables may need swapping if they wear out.
What limit appears first during sustained use of the AM202NEW?
Video output is capped at 4K resolution at 30 Hz, so extended sessions at higher refresh rates are not supported.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



