We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 metre USB 3.0 A to Micro-B repeater cable with mounting screws on Micro-B end

Vszerda

Vszerda 8m USB 3.0 A to Micro-B Repeater Cable with Mount Screws

SKU CH-HBSD-ASFGK

An 8.0 m USB 3.0 A-to-Micro-B cable with a repeater chipset and panel-mount screws for reliable 4.8 Gbps data transfer over long runs

  • TypeUSB
  • ColorBlack
  • Cable Length26 ft
  • Length26 ft
  • Terminal GenderMale-to-Male
  • Speed0.48 gigabits_per_second
  • 8 m reach with built-in repeater maintains 4.8 Gbps throughput
  • Male-to-Male USB 3.0 A to Micro-B connector with panel-mount screws
  • Backwards compatible down to USB 1.1 for legacy gear
  • Copper construction supports high-speed data over 26 ft length
  • Repeater chipset boosts signal integrity across full 8.0 m run

Extended Reach USB 3.0 Cable

This Vszerda repeater cable spans 8.0 metres between a USB 3.0 Type-A host and a Micro-B device. An integrated repeater chipset maintains signal integrity over the full 26 ft run. It targets installers who need reliable long-distance links for cameras or external drives.

Upgrade From Passive Length Limits

Passive USB 3.0 cables typically fail beyond three metres at full speed. This active assembly replaces those shorter leads when the device must sit farther from the host. The jump is worth it only when the extra distance is mandatory and both ends support USB 3.0.

Practical Limits Of USB 3.0 Over Distance

Maximum throughput reaches 4.8 Gbps with a USB 3.0 host and device; otherwise the link falls back to USB 2.0 or 1.1 speeds. The repeater draws power from the bus, so marginal host ports may struggle at the full 8.0 m. Micro-B screws secure the device end but add no electrical benefit.

Highlights

  • 8 m reach with built-in repeater maintains 4.8 Gbps throughput
  • Male-to-Male USB 3.0 A to Micro-B connector with panel-mount screws
  • Backwards compatible down to USB 1.1 for legacy gear
  • Copper construction supports high-speed data over 26 ft length
  • Repeater chipset boosts signal integrity across full 8.0 m run

Specifications

Brandxiwai
TypeUSB
ColorBlack
Cable Length26 ft
Length26 ft
Terminal GenderMale-to-Male
Speed0.48 gigabits_per_second
ConstructionCopper
FeaturesHigh Speed

Questions about this item

How much clearance is needed for the Micro-B connector and its two mount panel screws?

The Micro-B plug includes two mount panel screws for panel attachment; allow enough depth for the plug body plus the screw heads when planning the cut-out.

What is the correct order to connect the repeater cable so the built-in chipset activates?

Plug the USB 3.0 Type-A end into the host first, then attach the Micro-B end to the device; the repeater chipset powers from the host side and needs that sequence to initialise.

Will the active repeater chipset eventually need replacement, and how can I tell?

The chipset draws power from the host USB port; if sustained throughput drops below 4.8 Gbps or the link falls back to 480 Mbps repeatedly, the cable should be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.