We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular box with one DisplayPort input and three outputs plus a power socket

Vszerda

Vszerda 8K DisplayPort Splitter 1 in 3 Out 8K@30Hz 4K@144Hz DP 1.4 MST SST

SKU CH-CNGM-J2AYM

Connects three DisplayPort monitors to one source with support up to 8K at 30 Hz or 4K at 144 Hz using DisplayPort 1.4 MST

  • Connect three monitors from one DisplayPort 1.4 source
  • Extend or mirror displays with MST and SST support
  • Drive a single screen at 8K 30 Hz
  • Run dual monitors at 4K 60 Hz with HDR off
  • Power three ultrawide panels at 2560 x 1600

Three-Monitor DP 1.4 Hub

This DisplayPort 1.4 MST hub connects three monitors to a single MST-enabled source. It suits professionals who need an extended desktop across multiple screens without adding a second graphics card. The splitter handles both SST mirror and MST extended modes for flexible workspace layouts. It requires a 5 V external power supply to operate.

Thermals Noise Power

The unit draws power from the included 5 V adapter and has no active cooling, so it runs silently. Typical power consumption stays low because the device only manages signal distribution rather than rendering. No fan noise or measurable heat output appears during normal multi-monitor operation. This keeps the workstation quiet and the desk free of extra airflow concerns.

Build Integration

A single DisplayPort 1.4 output on the host system feeds the hub, which then drives up to three displays at 8K@30Hz, 4K@60Hz dual, or three ultrawide panels at 2560x1600 with HDR disabled. The source must support MST for extended mode; otherwise only mirror mode is available. This arrangement frees additional GPU outputs for other tasks or leaves them unused on compact systems.

Highlights

  • Connect three monitors from one DisplayPort 1.4 source
  • Extend or mirror displays with MST and SST support
  • Drive a single screen at 8K 30 Hz
  • Run dual monitors at 4K 60 Hz with HDR off
  • Power three ultrawide panels at 2560 x 1600

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 8K DisplayPort splitter and what step do people often miss?

Connect the splitter to an MST-enabled DisplayPort 1.4 source, attach up to three monitors, then plug in the required 5 V external power supply — the step most often missed is powering the unit before expecting a signal.

What maintenance or replacement will the 8K DisplayPort splitter need later?

No routine maintenance is required; only the 5 V external power adapter may need replacement if it fails or is lost.

What limit appears first when running three displays at high refresh with the 8K DisplayPort splitter?

With three ultrawide monitors the maximum supported resolution is 2560×1600 and HDR must be turned off, which is the first bandwidth ceiling you will hit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.