We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8643 male to four right-angle SATA female connectors, round black cable, one metre

Vszerda

Vszerda 8643-4xSATA-100RA Mini SAS SFF-8643 to 4x SATA 90° 1M 12Gb/s

SKU CH-M7NC-JZT1Z

Connects a Mini SAS SFF-8643 host port to four 90-degree SATA drives at 12 Gb/s over a 3.3-foot copper cable

  • TypeMini SAS
  • Length3.3 feet
  • Terminal GenderMale-to-Female
  • Speed12 gigabits_per_second
  • ConductorCopper
  • FeaturesHigh Speed
  • Connects RAID controller to four drives via SFF-8643 host port
  • 12 Gb/s data rate supports high-throughput storage workloads
  • 90-degree SATA plugs ease routing in tight chassis
  • 1 metre length fits typical server and workstation layouts
  • Copper conductors deliver reliable signal integrity

Host-side SFF-8643 cable for four drives

This Vszerda cable bridges a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. The 90-degree SATA connectors keep cable routing tidy in tight drive bays. Copper conductors support a 12 Gb/s link across a 3.3-foot run. It suits builders adding multiple drives to a single controller port.

Replaces four separate SATA leads from the board

One SFF-8643 connection replaces up to four individual motherboard SATA cables, reducing clutter and freeing board headers. The upgrade is worthwhile when the controller or backplane presents an SFF-8643 host port and the target drives use standard SATA. It will not work if the SFF-8643 port sits on a backplane rather than the host side.

Fits standard drive cages and controller cards

The male SFF-8643 plug seats into the host controller; four female 90-degree SATA plugs attach to drive backplanes or direct drive connectors. Round 39.37-inch length spans typical chassis depths without excess slack. No extra power adapters or active electronics are required beyond the drives themselves.

Highlights

  • Connects RAID controller to four drives via SFF-8643 host port
  • 12 Gb/s data rate supports high-throughput storage workloads
  • 90-degree SATA plugs ease routing in tight chassis
  • 1 metre length fits typical server and workstation layouts
  • Copper conductors deliver reliable signal integrity

Specifications

BrandHeretom
Model8643-4xSATA-100RA
TypeMini SAS
Length3.3 feet
Terminal GenderMale-to-Female
Speed12 gigabits_per_second
ConductorCopper
FeaturesHigh Speed

Questions about this item

What clearance does the 90-degree SATA end need to fit behind a drive cage?

The right-angle SATA connectors add roughly 39.37 mm of depth from the drive port, so allow at least that much space behind each drive bay.

Which end plugs into the controller and which end plugs into the drives?

The SFF-8643 male connector goes into the host or RAID controller; the four 90-degree SATA female connectors attach to the hard drives.

When should the cable be replaced to keep 12 Gb/s performance?

Replace it if the copper conductors show kinks, the 31-pin SFF-8643 housing cracks, or the SATA latches no longer click securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.