We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with eight SATA ports and M.2 B+M key edge connector

Vszerda

Vszerda 8 Port SATA III 6Gb/s to M.2 B+M Key Adapter PCIe 3.0 x2

SKU CH-7RDY-BS1KF

Connects eight SATA drives via an M.2 B+M Key slot with PCIe 3.0 x2 bandwidth up to 1700 MB/s

  • Connect eight SATA drives through a single M.2 B+M Key slot
  • JMB585 chipset delivers up to 1700 MB/s over PCIe 3.0 x2
  • FIS-based switching removes bottlenecks when multiple drives run together
  • Maximum sequential read/write speed reaches 850 MB/s per drive
  • Plug-and-play operation with Windows, Linux and NAS, no driver required

Vszerda 8 Port SATA III Adapter for M.2 B+M Key

This PCIe 3.0 x2 adapter connects up to eight SATA drives through a single M.2 B+M Key slot. It uses a Jmicron JMB585 chipset to deliver up to 1700 MB/s total bandwidth. The card includes two Mini SAS to 4 SATA cables for installation. It targets builders adding high-density storage to systems with an available M.2 slot.

Suits builders expanding SATA storage via an M.2

The adapter supports Port Multiplier in non-RAID configurations and works with SATA hard drives or SSDs. It complies with PCIe 3.1a and SATA AHCI 1.0 specifications for broad OS compatibility including Windows and Linux. Buyers needing hardware RAID functions or more than eight drive ports will not find those features here.

PCIe 3.0 x2 interface limits total throughput

The JMB585 chipset achieves this maximum sequencing rate across all eight ports combined. Individual drive speeds reach up to 850 MB/s for read or write operations. Systems without a compatible M.2 B+M Key slot supporting PCIe 3.0 x2 cannot use this adapter.

Highlights

  • Connect eight SATA drives through a single M.2 B+M Key slot
  • JMB585 chipset delivers up to 1700 MB/s over PCIe 3.0 x2
  • FIS-based switching removes bottlenecks when multiple drives run together
  • Maximum sequential read/write speed reaches 850 MB/s per drive
  • Plug-and-play operation with Windows, Linux and NAS, no driver required

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda 8 Port SATA III adapter into an M.2 B+M Key slot, and what step is often missed?

Insert the card into a 2-lane M.2 PCIe 3.0 B+M Key slot, secure it with the mounting screw, attach the two included Mini SAS cables to the card, then connect each cable to four SATA drives; the step often missed is ensuring the host BIOS enables the M.2 slot for PCIe rather than SATA mode.

What maintenance or replacement will the Vszerda 8 Port SATA III adapter need later?

The adapter itself has no moving parts and requires no scheduled maintenance; only the attached SATA drives or Mini SAS cables may need replacement if they fail or if you upgrade to higher-capacity drives.

What throughput limit appears first when all eight SATA ports run sustained transfers on the Vszerda adapter?

The JMB585 chipset caps aggregate throughput at 1700 MB/s over the PCIe 3.0 x2 link, so sustained multi-drive workloads will hit that ceiling before any single SATA 6Gbps port reaches its own 850 MB/s maximum.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.