We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black flat cables with an 8-pin EPS connector splitting to dual 6+2 PCIe connectors

Vszerda

Vszerda 8 Pin PCIE Cable EPS/ATX to Dual PCIE 8 Pin (6+2) for Corsair Modular PSU 2-Pack

SKU CH-JNSG-AKC7W

Connects a Corsair modular PSU to two graphics cards using 18 AWG wiring in a flat black design

  • TypeComponent
  • ColorBlack
  • Length64 centimeters
  • Connector DetailComponent
  • Terminal GenderMale-to-Male
  • SpecificationsComponent, 64, centimeters, black
  • EPS 8-pin to dual PCIe 8-pin (6+2) splits one PSU port for two GPUs
  • Made only for Corsair RM RMX RMi HX HXi AX AXi SF TX TX-M CS CS-M CX CX-M modular PSUs
  • 18 AWG thick wire handles heavy GPU loads safely
  • Flat black 64 cm cables route cleanly for better case airflow
  • Two cables included each 25 plus 10 inches for flexible routing

Compatibility and connectors

This cable set converts a single EPS12V 8-pin output from a Corsair modular power supply into two PCI-E 8-pin (6+2) connectors for graphics cards. It is built exclusively for the RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX and CX-M series and will not work with the AX1200 model.

Who should use this and who should not

Builders powering a GPU that needs one or two 8-pin or 6-pin sockets from a compatible Corsair unit will find these cables fit directly. Anyone using a non-Corsair PSU, a different modular pin-out or an AX1200 must look for a cable designed for that specific supply.

Behaviour under sustained load

Each cable uses 18AWG conductors rated for heavy-duty current delivery, and the flat black array construction keeps airflow clear during extended gaming or rendering sessions. The 64-centimetre length with a 25-plus-10-inch split provides reach for larger cases without adding bulk.

Highlights

  • EPS 8-pin to dual PCIe 8-pin (6+2) splits one PSU port for two GPUs
  • Made only for Corsair RM RMX RMi HX HXi AX AXi SF TX TX-M CS CS-M CX CX-M modular PSUs
  • 18 AWG thick wire handles heavy GPU loads safely
  • Flat black 64 cm cables route cleanly for better case airflow
  • Two cables included each 25 plus 10 inches for flexible routing

Specifications

BrandJZYMOD
TypeComponent
ColorBlack
Length64 centimeters
Connector DetailComponent
Terminal GenderMale-to-Male
SpecificationsComponent, 64, centimeters, black
Disclaimer1-year warranty

Questions about this item

Which Corsair modular PSU series must I already have to use this cable?

The cable is built for Corsair RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX and CX-M series units, but it will not work with the AX1200.

Will this cable power a graphics card that only has a 6-pin PCIe socket?

Yes, each branch ends in an 8-pin (6+2) connector so the 6-pin portion can be used alone for cards with a 6-pin socket.

How can I verify the cables are delivering power correctly after installation?

With 18AWG conductors the cables should stay cool; if the GPU powers up and runs without shutdowns or connector melting, the cables are working as intended.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.