Vszerda
Vszerda 6Pin to 3x SATA Internal Power Cable 50+15+15cm
Splits one 6-pin output into three SATA power connectors for SSDs or HDDs in Corsair SF-series modular power supplies, using 18 AWG wire with 50 cm, 15 cm and 15 cm branches
- Powers three SATA drives from one 6-pin port
- 18 AWG wire handles high current safely
- 50 cm lead reaches drives in large cases
- Compatible with Corsair SF450 SF600 SF750 PSUs
Vszerda 6-Pin to Triple SATA Cable
This Vszerda cable converts a single 6-pin modular output on Corsair SF450, SF600 or SF750 power supplies into three straight SATA power connectors. The 18 AWG wiring runs 50 cm to the first connector with 15 cm gaps to the second and third drives. It is built new for internal desktop use.
Suits builders adding multiple SATA drives
The three-connector layout fits systems that need several SSDs or hard drives from one modular port. It will not work with power supplies that lack a compatible 6-pin peripheral output, and it cannot power drives that require a different connector type.
Highlights
- Powers three SATA drives from one 6-pin port
- 18 AWG wire handles high current safely
- 50 cm lead reaches drives in large cases
- Compatible with Corsair SF450 SF600 SF750 PSUs
Specifications
No published specifications for this item yet.
Questions about this item
Does the 18AWG wire on this 6-pin to triple SATA cable run warm when drives are spinning continuously?
The 18AWG conductors are rated for the current drawn by typical SATA SSDs and hard drives, so the cable stays cool during all-day operation.
Which power supply must I already have to plug this 6-pin connector straight in?
It is keyed for Corsair SF450, SF600 and SF750 modular units, so one of those PSUs is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



