We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda 5P to 3× SATA 4P & 3× HDD 4P power splitter cable 80cm 18AWG black

SKU CH-SRFP-MWQJB

Splits one 5-pin connector into three SATA and three 4-pin power leads using 18 AWG tinned copper over 80 cm total length

  • ColorBlack
  • Terminal GenderMale-to-Female
  • ConductorCopper
  • FeaturesTangle Free
  • Powers three SATA drives from one 5-pin connector
  • Powers three 4-pin hard drives from one 5-pin connector
  • 18AWG tinned copper conductors deliver reliable current
  • 80 cm total length with 50 cm, 15 cm and 15 cm branches
  • Tangle-free black cable keeps builds tidy

Power distribution for SATA and legacy drives

This Vszerda splitter converts a single 5-pin power connector into three SATA 4-pin and three 4-pin peripheral plugs. Builders adding multiple hard drives or SSDs to a server or workstation can power six devices from one modular cable. The 18AWG tinned copper conductors deliver reliable current across all branches. Black sheathing keeps the loom tidy inside the chassis.

Upgrade from single-drive cables or short harnesses

Replacing individual SATA power leads or Molex-to-SATA adapters reduces cable count and improves airflow. The jump is worth it when a power supply lacks enough native SATA or peripheral connectors for a drive array. The 50 cm main trunk reaches the drive cage while 15 cm tails keep each device connection short. No extra adapters are required for mixed SATA and 4-pin loads.

Fits modular PSU cables with a 5-pin socket

The male 5-pin end plugs directly into a compatible modular power supply port, freeing up other sockets for GPUs or CPU power. Six female outputs handle combinations of SSDs, HDDs and optical drives without daisy-chaining. Tangle-free construction simplifies routing behind motherboard trays. Total length of 80 cm suits mid-tower and larger enclosures.

Highlights

  • Powers three SATA drives from one 5-pin connector
  • Powers three 4-pin hard drives from one 5-pin connector
  • 18AWG tinned copper conductors deliver reliable current
  • 80 cm total length with 50 cm, 15 cm and 15 cm branches
  • Tangle-free black cable keeps builds tidy

Specifications

BrandVszerda
ColorBlack
Terminal GenderMale-to-Female
ConductorCopper
FeaturesTangle Free

Questions about this item

Will the 50 cm main lead and two 15 cm branches reach my drives in a mid-tower case?

The cable totals 80 cm with a 50 cm trunk and two 15 cm branches, giving enough length for typical mid-tower drive bays.

What is the correct orientation for the 5-pin module plug so I do not force it?

Align the keyed 5-pin male connector with the PSU's 5-pin female port; the notch only fits one way, preventing reverse insertion.

When should I replace the splitter if I run three drives continuously?

Inspect the 18 AWG tinned copper wires and connectors yearly; replace the cable if insulation cracks, pins discolour, or voltage drop appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.