We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five small green circuit boards with blue potentiometers and black components

Vszerda

Vszerda 5A DC-DC CC CV Lithium Charger Module XL4015 5-32V to .8-30V 5Pcs

SKU CH-W88F-ZGNSX

Pack of five step-down modules with constant-current and constant-voltage modes for lithium charging from 5-32 V input to .8-30 V output

  • Five boards per pack for multiple builds
  • 5 A continuous output charges lithium packs fast
  • Input range 5-32 V suits diverse sources
  • Adjustable 0.8-30 V output matches cell voltage

Five-piece XL4015 step-down charger modules

This pack contains five identical DC-to-DC buck converter boards built around the XL4015 controller. Each module accepts an input range of 5 to 32 V and delivers a continuously adjustable output from .8 to 30 V at up to 5 A. Constant-current and constant-voltage modes support lithium battery charging as well as general LED or power-supply duties.

Verify your source voltage

Ensure the supply you intend to connect stays within the 5 to 32 V input window and can provide enough current for the desired output. The output voltage must be set above .8 V and below 30 V to match the battery or device you are powering. Confirm that the total draw will not exceed 5 A per board and that you have adequate heatsinking for continuous high-current operation.

Highlights

  • Five boards per pack for multiple builds
  • 5 A continuous output charges lithium packs fast
  • Input range 5-32 V suits diverse sources
  • Adjustable 0.8-30 V output matches cell voltage

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the package and is anything else needed to start using the modules?

The pack contains five XL4015 step-down modules. You will need a DC power source within the 5-32V input range and a load or battery that accepts 0.8-30V output.

How do I decide between the different voltage and current settings on each board?

Each module is adjustable from 0.8V to 30V output with a 5A current limit. Set the output voltage to match your battery or load specification and limit current to 5A or lower as required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.