We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black Y-splitter cables with mini 4-pin PH 2.0 and standard 4-pin connectors

Vszerda

Vszerda 5-pack PWM MINI 4-pin PH 2.0 to 4-pin Y-splitter internal power cable

SKU CH-WN5D-GHZKK

A five-cable set splits one 4-pin PWM header into two PH 2.0 fan connectors for graphics cards or motherboards

  • Connect two fans from one header using the 1-to-2 Y-splitter design
  • Control fan speed precisely via PWM MINI 4-pin PH 2.0 connectivity
  • Power graphics card or motherboard fans with standard 4-pin connectors
  • Install five splitters at once with the convenient 5-piece pack

Five-way PWM fan splitter kit

This pack contains five Y-splitter cables that convert a single MINI 4-pin PH 2.0 header into two standard 4-pin PWM fan connectors. Each adapter lets a graphics card or motherboard header drive two fans with speed reporting and duty-cycle control. The set suits builders who need to expand limited fan headers inside a compact chassis.

PH 2.0 header current ceiling

The MINI 4-pin PH 2.0 connector is rated for lower current than a full-size 4-pin header, so the combined draw of both attached fans must stay within that limit. Exceeding it can cause voltage drop, erratic speed control or header damage. Builders planning high-static-pressure fans or daisy-chained splitters should verify the header’s ampere rating before connecting.

Highlights

  • Connect two fans from one header using the 1-to-2 Y-splitter design
  • Control fan speed precisely via PWM MINI 4-pin PH 2.0 connectivity
  • Power graphics card or motherboard fans with standard 4-pin connectors
  • Install five splitters at once with the convenient 5-piece pack

Specifications

No published specifications for this item yet.

Questions about this item

Should I use the MINI 4-pin PH 2.0 connector or the standard 4-pin header on my motherboard?

Use the MINI 4-pin PH 2.0 connector for graphics cards or compact headers; the standard 4-pin end plugs into a regular motherboard or controller header.

Will both fans on the Y-splitter report speed and accept PWM control from a single header?

Yes, the splitter passes the PWM signal and tachometer wire to both 4-pin branches so each fan runs at the same commanded speed and reports its RPM.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.