Vszerda
Vszerda 5.25" Front Panel 6-Port USB Hub (2×3.0, 4×2.0) Black Metal
Adds two USB 3.0 and four USB 2.0 ports to a 5.25-inch bay using motherboard headers and a Molex power connector
- Adds six front USB ports using a single 5.25" bay
- Two USB 3.0 ports deliver up to 5Gbps transfer speed
- Four USB 2.0 ports run at 480Mbps for peripherals
- Connects via 20-pin and 10-pin motherboard headers
- Includes Molex power for high-draw devices
Front-bay USB hub for desktop PCs
The Vszerda 5.25-inch front panel converts a single CD-ROM bay into six front-facing USB ports. Two ports run at USB 3.0 speeds and four at USB 2.0 speeds. A 2.6 ft adapter cable connects the panel to one USB 3.0 20-pin header and one USB 2.0 10-pin header on the motherboard. A Molex 4-pin power connector supplies extra current for demanding peripherals. The unit is plug-and-play on Windows XP through 8.1.
Builders with a free 5.25-inch bay
This hub suits anyone who wants fast, front-access ports without opening the case. It requires one USB 3.0 20-pin header and one USB 2.0 10-pin header simultaneously; systems lacking either header cannot use the corresponding ports. Builders whose cases have no 5.25-inch bay, or who prefer rear-only connectivity, will not benefit from this panel.
Two USB 3.0 and four USB 2.0 Type-A ports
The decisive specification is the port mix: exactly two USB 3.0 Type-A sockets and four USB 2.0 Type-A sockets. USB 3.0 delivers up to 5 Gbps transfer rates while USB 2.0 tops out at 480 Mbps. If your workflow needs more than two high-speed ports or more than four legacy ports, this panel does not match the requirement.
Highlights
- Adds six front USB ports using a single 5.25" bay
- Two USB 3.0 ports deliver up to 5Gbps transfer speed
- Four USB 2.0 ports run at 480Mbps for peripherals
- Connects via 20-pin and 10-pin motherboard headers
- Includes Molex power for high-draw devices
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box and do I need to buy any cables or screws separately?
The hub includes a 2.6ft adapter cable with both 20-pin USB 3.0 and 10-pin USB 2.0 motherboard connectors, plus a Molex 4-pin power lead and mounting screws. No extra parts are required.
Should I pick a different version if my motherboard only has a 10-pin USB 2.0 header?
This single model needs both a 20-pin USB 3.0 header and a 10-pin USB 2.0 header to enable all six ports. If your board lacks the 20-pin header, the two USB 3.0 ports will not function.
What does the 5Gbps headline speed mean when I plug in a USB 3.0 drive?
The two USB 3.0 Type-A ports support up to 5Gbps theoretical bandwidth; real-world transfer rates depend on the drive, cable quality and system load, but will not exceed that ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



