We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 5.25 inch front bay fan controller with LED temperature display

Vszerda

Vszerda 5.25" 3-Channel Fan Controller w/ Temp Display

SKU CH-XXVJ-WPQ10

A 5.25" bay controller manages three fans at 40–100% speed with manual or automatic modes, shows CPU, HDD and system temperatures up to 99°C, and alarms at 70°C, 50°C and 60°C respectively

  • Monitors CPU, HDD and system temps from 0–99 °C ±2 °C
  • Automatic fan curves ramp 40–100 % speed as temperature rises
  • Manual low/high speed presets plus three-channel independent control
  • Audible and visual alarms at 70 °C CPU, 60 °C system, 50 °C HDD
  • Fits one 5.25″ bay and supports both 3-pin and 4-pin fans

5.25" Bay Fan Controller with Temperature Display

The Vszerda unit fits a single 5.25" front-panel bay and connects up to three case fans. It accepts both three-pin and four-pin fan headers and provides manual or automatic speed control. The built-in LED display shows real-time temperatures for CPU, HDD and system zones. It is intended for builders who want direct, bay-mounted fan management with visual temperature feedback.

Temperature Range, Alarm Thresholds and Speed Limits

The controller reads temperatures from 0 to 99 degrees with an accuracy of plus or minus two degrees. Fixed over-temperature alarms trigger at 70 degrees for CPU, 60 degrees for system and 50 degrees for HDD. Fan speed can be adjusted between 40 and 100 percent, either manually through low and high presets or automatically based on sensor input. An audible alarm and flashing icon warn of fan stall or overload conditions.

Replaces Software-Only Fan Curves and Basic Switches

This hardware controller replaces reliance on motherboard BIOS curves or simple voltage switches by adding dedicated temperature sensors and a physical display. The jump is worth it when you need immediate visual confirmation of component temperatures and hardware-level stall detection without booting into an operating system. It does not serve builders who require more than three fan channels or per-channel temperature assignment beyond the three labelled zones.

Highlights

  • Monitors CPU, HDD and system temps from 0–99 °C ±2 °C
  • Automatic fan curves ramp 40–100 % speed as temperature rises
  • Manual low/high speed presets plus three-channel independent control
  • Audible and visual alarms at 70 °C CPU, 60 °C system, 50 °C HDD
  • Fits one 5.25″ bay and supports both 3-pin and 4-pin fans

Specifications

No published specifications for this item yet.

Questions about this item

How many fans can I connect to this 5.25" bay controller?

You can connect up to three fans, each using either a 3-pin or 4-pin connector, and control them manually or automatically from the front panel.

What does the 40% to 100% speed range mean for daily use?

The fans never stop completely; they run at a minimum of 40 % and scale up to full speed based on the temperature sensor readings.

Which fan connector standard does the automatic control require?

Automatic temperature-based control works only with Intel-certified 3-pin fans; 4-pin fans can be connected but will not use the auto mode.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.