Vszerda
Vszerda 4K USB3.0 KVM Switch 4 PC 2 Monitors
Control four computers across two monitors with one keyboard and mouse via push-button switching
- TypePush Button
- Monitor ConnectionsUSB 3.0 4 PC 2 Monitors (HDMI+HDMI)
- PC SelectionPush Button
- Weight1.1 lb
- Control 4 computers with one keyboard and mouse via 2 HDMI monitors
- 3 USB 3.0 ports transfer data up to 5Gbps for peripherals
- 4K resolution at 60Hz with HDMI 2.0 and HDCP 2.2 support
- Push-button and wired remote switching with LED indicators for 4 PCs
- Includes 4 USB cables and supports copy, extended and splicing display modes
Four-computer dual-monitor control
This USB 3.0 KVM switch lets a single keyboard, mouse and two HDMI monitors manage four computers. It includes four USB cables and a wired push-button remote so users can change the active system without reaching behind the desk. The unit is aimed at multi-system workstations, developers and content creators who need simultaneous access to several machines.
Steady 4K@60Hz across both displays
Each monitor can run at 3840x2160@60Hz continuously, provided the source computers, monitors and HDMI 2.0 cables all support that mode. The switch passes HDCP 2.2 and EDID data without compression, so colour accuracy and refresh rate remain stable during long editing or rendering sessions. USB 3.0 ports deliver up to 5 Gbps for attached storage or peripherals while the video path stays active.
HDMI 2.0 bandwidth and dual-output requirement
The dual-monitor layout demands that every connected computer exposes two functioning HDMI outputs simultaneously; laptops with only one video port cannot drive both screens. HDMI 2.0 cables are mandatory for 4K@60Hz — older cables will fall back to lower resolutions. The switch does not support hotkey switching, so control is limited to the front-panel button or the wired remote.
Highlights
- Control 4 computers with one keyboard and mouse via 2 HDMI monitors
- 3 USB 3.0 ports transfer data up to 5Gbps for peripherals
- 4K resolution at 60Hz with HDMI 2.0 and HDCP 2.2 support
- Push-button and wired remote switching with LED indicators for 4 PCs
- Includes 4 USB cables and supports copy, extended and splicing display modes
Specifications
| Brand | LUKFOCAB |
|---|---|
| Model | 4K USB3.0 KVM Switch 4 PC 2 Monitors |
| Part Number | BO24-PA |
| Type | Push Button |
| Monitor Connections | USB 3.0 4 PC 2 Monitors (HDMI+HDMI) |
| PC Selection | Push Button |
| Weight | 1.1 lb |
Questions about this item
Does the Vszerda 4K USB3.0 KVM Switch 4 PC 2 Monitors run hot or draw much power when switching between four computers all day?
The unit is a passive push-button switch with no internal power supply listed, so it adds negligible heat and draws only the small current needed for its LED indicators and USB 3.0 hub logic.
What cables and ports must my four computers already provide for this KVM to work?
Each computer needs two HDMI 2.0 outputs and one standard USB-A port to connect the included USB 3.0 cables; both monitors need HDMI inputs.
Will my older 1080p monitors work alongside a new 4K display on this KVM?
Yes, the switch supports EDID adaptive pass-through and resolutions up to 4K@60Hz, so a 1080p monitor and a 4K monitor can run together in extended mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



