Vszerda
Vszerda 4K USB2.0 KVM Switch 2 PC 2 Monitors
A dual-monitor KVM switch lets two computers share two 4K@60 Hz displays, keyboard, mouse and five USB 2.0 ports via push-button or wired remote
- TypePush Button
- Monitor ConnectionsUSB 2.0 2 PC 2 Monitors (HDMI+HDMI)
- PC SelectionPush Button
- Dimensions3.94 in x 1.97 in x 1.18 in
- Weight0.531 kilograms
- Control two computers with one keyboard and mouse across dual monitors
- 4K resolution at 60 Hz with HDMI 2.0 and HDCP 2.2 support
- Five USB 2.0 ports for keyboard, mouse and extra peripherals
- Switch by front button or included wired remote for convenience
- Compact 3.94 x 1.97 x 1.18 inch unit weighing 1.15 pounds
Dual-monitor KVM for two PCs
The Vszerda switch lets one keyboard and mouse control two computers across two HDMI displays. Each PC must provide dual HDMI outputs for the setup to work. Five USB 2.0 ports handle keyboard, mouse and an extra peripheral such as a gamepad or SSD. A wired remote button and a front-panel push button give two ways to change the active system. The unit ships with USB power and data cables.
Passive cooling with external power
No fans are present; the aluminium chassis dissipates the modest heat from the HDMI 2.0 and USB 2.0 circuitry. A supplied USB power cable feeds the switch to keep signal integrity stable during normal desktop use. Operation is silent because there are no moving parts. The IP00 rating means the enclosure is not sealed against dust or moisture.
Stable 4K@60 Hz under continuous load
HDMI 2.0 and HDCP 2.2 compliance let both monitors run at 4K 60 Hz for extended sessions without bandwidth throttling. The supplier notes that EDID emulation is absent, so displays may need a manual resolution reset after each switch. Standard-quality HDMI cables are recommended to avoid flicker on longer runs. The switch maintains the link as long as the USB power source remains active.
Highlights
- Control two computers with one keyboard and mouse across dual monitors
- 4K resolution at 60 Hz with HDMI 2.0 and HDCP 2.2 support
- Five USB 2.0 ports for keyboard, mouse and extra peripherals
- Switch by front button or included wired remote for convenience
- Compact 3.94 x 1.97 x 1.18 inch unit weighing 1.15 pounds
Specifications
| Brand | LUKFOCAB |
|---|---|
| Model | 4K USB2.0 KVM Switch 2 PC 2 Monitors |
| Part Number | BO08-DC |
| Type | Push Button |
| Monitor Connections | USB 2.0 2 PC 2 Monitors (HDMI+HDMI) |
| PC Selection | Push Button |
| Dimensions | 3.94 in x 1.97 in x 1.18 in |
| Weight | 0.531 kilograms |
Questions about this item
How do I install the 4K USB2.0 KVM Switch with two PCs and two monitors, and what step is often missed?
Connect each PC using one HDMI cable and one USB 2.0 data cable, plug the monitors into the two HDMI outputs, attach keyboard and mouse to the dedicated USB 2.0 ports, then connect the included USB power cable to a 5 V source; the step often missed is powering the unit before switching.
What maintenance or replacement will the wired remote or USB power cable need over time?
The wired remote uses a simple push-button actuator rated for two positions and the USB power cable is a standard 2.0 lead; both are passive parts with no batteries or firmware, so only physical wear on the button or cable jacket would ever require replacement.
What limit appears first when running both monitors at 4K@60Hz continuously through the HDMI 2.0 HDCP 2.2 link?
The HDMI 2.0 bandwidth ceiling of 18 Gbps is the first hard limit; it caps dual 4K@60Hz to 8-bit colour and leaves no headroom for higher refresh rates or deeper colour formats.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.00894897BTC
In stock