We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black boxes with HDMI and RJ45 ports, one labelled Transmitter, one Receiver

Vszerda

Vszerda 4K 60Hz HDMI Extender Over Ethernet Cat7 Cat6 Cat5e 200ft 330ft POE Transmitter Receiver

SKU CH-9N8E-FMHP6

Extends HDMI up to 200 ft at 4K 60 Hz or 330 ft at 4K 30 Hz over Cat5e, Cat6 or Cat7 with PoE powering the receiver

  • Extends 4K 60 Hz video up to 200 ft over Cat5e/6/7 cable
  • Reaches 330 ft at 4K 30 Hz for longer cable runs
  • Powers the receiver through the Ethernet link so no local outlet is needed
  • Works with consoles, streamers, Blu-ray players and projectors at 1080p and above
  • Includes IR cables and a two-minute setup for quick installation

Vszerda 4K 60Hz HDMI Extender

The Vszerda extender transmits HDMI signals over standard Cat5e, Cat6, or Cat7 Ethernet cables using RJ45 connectors. It is built for installers and AV professionals who need to bridge long distances between a source and a display without running heavy HDMI cables. The kit includes both a transmitter and a receiver unit for a complete point-to-point link.

200ft at 4K 60Hz over Cat6

The single specification that decides suitability is the maximum reach at full resolution: 4K at 60Hz extends up to 200 feet over Cat5e, Cat6, or Cat7 cabling. If the run must go further, the system drops to 4K at 30Hz for distances up to 330 feet over Cat5 or Cat6, so the cable grade and length directly dictate the available refresh rate.

POE-powered receiver for sustained runs

Under sustained load the receiver draws power through the Ethernet link itself, removing the need for a local mains outlet at the display side. This POE design keeps the signal path stable over the full 200-foot or 330-foot run without voltage drop from a long DC cable, and the included IR pass-through cables maintain remote control operation throughout extended sessions.

Highlights

  • Extends 4K 60 Hz video up to 200 ft over Cat5e/6/7 cable
  • Reaches 330 ft at 4K 30 Hz for longer cable runs
  • Powers the receiver through the Ethernet link so no local outlet is needed
  • Works with consoles, streamers, Blu-ray players and projectors at 1080p and above
  • Includes IR cables and a two-minute setup for quick installation

Specifications

No published specifications for this item yet.

Questions about this item

Does the 4K 60Hz rating hold over the full 200 ft Cat6 run?

Yes, the extender delivers 4K at 60 Hz up to 200 feet over Cat5e, Cat6 or Cat7 cable.

What HDMI bandwidth ceiling does the link enforce?

The link supports 4K 60 Hz, 4K 30 Hz, 2K, 1080p and 3D formats.

Does the receiver need its own wall outlet?

No, PoE powers the receiver through the Ethernet cable so only the transmitter requires a power adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.