We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square axial cooling fan 120 by 120 by 38 mm with two-pin connector

Vszerda

Vszerda 4715MS-23T-B50 AC230V 120×120×38mm cooling fan

SKU CH-E1QM-W482V MPN 4715MS-23T-B50

AC230V axial fan, 120×120×38mm, 2800rpm, 45dB, 2-pin BTH connector for equipment cooling

  • Runs on standard 230V AC mains power
  • 2800 rpm airflow at 45 dB noise level
  • 120 × 120 × 38 mm fits 12038 mounting pattern
  • 2-pin BTH connector for quick installation
  • Replaces NMB 4715MS-23T-B50 fan directly

AC230V axial cooling fan

This Vszerda 4715MS-23T-B50 is a 120×120×38 mm axial fan that runs on 230 V AC at 50/60 Hz. It draws 15 W at 50 Hz and 14 W at 60 Hz while spinning at 2800 rpm. The unit uses a 2-pin BTH connector and air cooling in a black frame.

Suits direct mains-powered replacement

It fits equipment designed for a 12038 form-factor fan with a 2-pin BTH lead and 230 V AC supply. Builders needing a different voltage, a PWM or 3-pin connector, or a smaller footprint should look at other models.

230 V AC mains voltage

The single specification that decides compatibility is the 230 V AC rating; the fan will not operate on low-voltage DC circuits. Verify that the target device supplies mains power and accepts a 2-pin BTH plug before ordering.

Highlights

  • Runs on standard 230V AC mains power
  • 2800 rpm airflow at 45 dB noise level
  • 120 × 120 × 38 mm fits 12038 mounting pattern
  • 2-pin BTH connector for quick installation
  • Replaces NMB 4715MS-23T-B50 fan directly

Specifications

No published specifications for this item yet.

Questions about this item

What AC voltage and frequency does the 4715MS-23T-B50 fan require?

It runs on 230 V AC at 50 or 60 Hz and draws 15 W at 50 Hz or 14 W at 60 Hz.

What are the exact dimensions and connector type of this 120×120×38 mm fan?

The frame is 120 mm square by 38 mm thick with a 2-pin BTH connector.

How is the Vszerda 4715MS-23T-B50 installed and what common mistake should be avoided?

Connect the 2-pin BTH plug to the matching header, secure the fan with four corner screws, and ensure airflow direction matches the arrow on the housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.