Vszerda
Vszerda 4715ms-23t-b50-a00 120×120×38 mm 230 V case fan
120 mm AC case fan with two-ball bearings delivering 88.25 cfm at 2600 rpm and 37 dBA noise
- Reliable airflow for cases with 88.25 cfm at 2600 rpm
- Long service life backed by 50000 hours two ball bearing rating
- Mains powered convenience using 230 V AC at 0.12 A
- Quiet operation at 37 dBA under load
- Wide temperature tolerance from -20 to 75 °C
230 V AC case fan for cabinets
The Vszerda 4715ms-23t-b50-a00 is a 120 × 120 × 38 mm axial fan built for direct 230 V mains supply. It targets installers who need forced-air cooling inside server cabinets, industrial enclosures or PC chassis without a low-voltage power supply.
Two-ball bearing and 37 dBA acoustic profile
Dual ball bearings give a rated service life of 50 000 hours across an ambient range of –20 °C to 75 °C. The fan draws 0.12 A at 15 W, spins at 2 600 rpm and delivers 88.25 cfm (2.5 m³/min) against 63.7 Pa static pressure. A plastic frame and blades keep weight to 550 g while meeting CE certification.
Wire leads only — no connector or controller bundled
The unit ships with bare power leads, so integration requires a terminal block, IEC socket or direct wiring. No PWM cable, fan hub or mounting screws are included, meaning the installer must supply fixation hardware and any speed-control circuitry. Buyers who need a 12 V PWM variant or a pre-wired plug should look elsewhere.
Highlights
- Reliable airflow for cases with 88.25 cfm at 2600 rpm
- Long service life backed by 50000 hours two ball bearing rating
- Mains powered convenience using 230 V AC at 0.12 A
- Quiet operation at 37 dBA under load
- Wide temperature tolerance from -20 to 75 °C
Specifications
No published specifications for this item yet.
Questions about this item
What mains voltage does the 230 V AC fan require to run?
The fan is rated for 230 V AC at 0.12 A, drawing 15 W at full speed.
What are the exact mounting dimensions and hole spacing for the 120×120×38 mm frame?
The square frame measures 120 mm per side with a 38 mm depth; mounting holes follow the standard 120 mm fan pattern.
How is the two-ball-bearing fan wired for installation in a cabinet?
Connect the two lead wires directly to a 230 V AC supply; observe polarity markings on the housing to avoid reverse rotation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
