We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver metal box with four red white yellow RCA ports and one HDMI port plus a remote control

Vszerda

Vszerda 4 Port RCA to HDMI Converter 720p/1080p 60Hz with Remote

SKU CH-DBC6-NW26W

Connects four RCA composite sources to one HDMI display at up to 1080p 60Hz with IR remote switching

  • Connect four legacy devices via one HDMI port
  • 10-bit 162 MSPS sampling delivers sharp 1080p 60 Hz output
  • Switch between 4:3 and 16:9 with the included IR remote
  • Driver-free plug-and-play setup in a durable aluminium enclosure
  • Supports PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL/M and PAL/N standards

Four-port RCA to HDMI converter

This Vszerda converter accepts four composite RCA sources and outputs a single HDMI signal at 720p or 1080p at 60Hz. It is aimed at retro-gaming enthusiasts and archivists who want to connect legacy consoles such as Sega, Wii, N64, GameCube, SNES, PlayStation 1 through 3, original Xbox, VHS or DVD players to a modern display or projector. The unit auto-detects PAL, NTSC and SECAM variants and includes a 4:3 or 16:9 aspect-ratio switch.

Passive cooling and low power draw

The aluminium enclosure dissipates heat without a fan, so operation is silent in normal use. A 5 V USB power cable is supplied and must be connected for the converter to function; no external power brick or driver installation is required. Power consumption remains minimal, making it suitable for always-on setups behind a TV or inside a cabinet.

Remote switching and signal processing

The bundled IR remote lets you change the active input without reaching for the box, while the front-panel button provides a manual alternative. Internal 10-bit 162 MSPS sampling converts the composite signal to a clean digital picture with accurate colours and detail. The converter cannot pass 4K or 3D content and does not work in reverse from HDMI to RCA.

Highlights

  • Connect four legacy devices via one HDMI port
  • 10-bit 162 MSPS sampling delivers sharp 1080p 60 Hz output
  • Switch between 4:3 and 16:9 with the included IR remote
  • Driver-free plug-and-play setup in a durable aluminium enclosure
  • Supports PAL, NTSC 3.58, NTSC 4.43, SECAM, PAL/M and PAL/N standards

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda 4 Port RCA to HDMI converter and what step do people often miss?

Connect each source to one of the four RCA inputs, link the HDMI output to your display, then plug the included USB power cable into a 5 V source — the unit will not turn on without that power connection.

What maintenance or replacement will this converter need over time?

The aluminium enclosure and internal chip are built for long-term use; no user-serviceable parts or scheduled maintenance are required — just keep the vents clear and the power cable secure.

What limit appears first when the converter runs continuously at 1080p 60 Hz?

The output is capped at 1080p 60 Hz with 10-bit 162 MSPS sampling, so 4K, 3D or higher refresh rates cannot be passed through regardless of how long the unit operates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.