We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black flat cables with EPS 8-pin plugs splitting to dual PCIe 6+2 connectors

Vszerda

Vszerda 4-Pack EPS 8 Pin to Dual PCIe 8 Pin (6+2) Cable for Corsair PSU

SKU CH-9VHD-BHTZR

Connects Corsair modular PSUs to two graphics-card power sockets per cable using 18 AWG wire in a flat black array

  • Length35 feet
  • Connector DetailMale-to-Male
  • SpecificationsVoltage: 12 volts; Connector: Male-to-Male; UL Listed: false
  • Connects EPS12V output to two PCIe 8-pin (6+2) connectors
  • Four cables included for multi-GPU builds or spare routing
  • 18 AWG conductors handle high current loads reliably
  • Flat black array design keeps interior tidy and airflow clear
  • Made specifically for Corsair RM RMX RMi HX HXi AX AXi SF TX TX-M CS CS-M CX CX-M series

Purpose-built PSU cables

This four-pack adapts Corsair modular power supplies to graphics cards that require dual eight-pin PCIe connectors. Each cable runs from a single EPS12V eight-pin port on the PSU side to two 6+2-pin PCIe plugs on the component side. The design targets builders who use Corsair RM, RMX, RMi, HX, HXi, AX, AXi, SF, TX, TX-M, CS, CS-M, CX or CX-M series units and need extra PCIe power without daisy-chaining from the PSU's own cables.

Replaces improvised power wiring

The cables remove the need to repurpose CPU power leads or use generic adapters that may not match Corsair's pinout. They are worth installing when a graphics card draws enough current to justify a dedicated EPS-sourced connection and the PSU has spare EPS ports. The AX1200 model is explicitly excluded, so owners of that unit must seek a different solution.

Sustained-load behaviour

Thick 18AWG conductors carry 12-volt power across a 35-foot total length split across the four cables, each measuring roughly 25 plus 10 inches end to end. The flat black array layout resists tangling and promotes airflow during extended gaming or compute sessions. Connectors are male-to-male throughout, rated for continuous 12-volt delivery without a UL listing.

Highlights

  • Connects EPS12V output to two PCIe 8-pin (6+2) connectors
  • Four cables included for multi-GPU builds or spare routing
  • 18 AWG conductors handle high current loads reliably
  • Flat black array design keeps interior tidy and airflow clear
  • Made specifically for Corsair RM RMX RMi HX HXi AX AXi SF TX TX-M CS CS-M CX CX-M series

Specifications

BrandJZYMOD
Length35 feet
Connector DetailMale-to-Male
SpecificationsVoltage: 12 volts; Connector: Male-to-Male; UL Listed: false

Questions about this item

What PSU-side connector does each cable use to plug into a Corsair modular power supply?

Each cable uses an EPS12V 8-pin male connector that inserts into the corresponding modular port on compatible Corsair PSUs.

Which step do builders most often miss when seating the 6+2 PCIe ends into a graphics card?

They forget to slide the 2-pin segment onto the 6-pin block until it clicks, leaving the extra pins loose and the connection incomplete.

When should the 18 AWG wires be inspected or the cables replaced?

Check the flat black cables whenever you rebuild or upgrade the GPU; replace any that show cracked insulation, melted pins or corroded contacts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.