Vszerda
Vszerda 4.5 x 3.0mm Bent Male to 5.5 x 2.1mm Female Power Adapter Cord 10cm
Connects a 4.5 x 3.0 mm bent male plug to a 5.5 x 2.1 mm female jack in a 10 cm cable
- Bent 4.5 x 3.0mm male plug fits tight laptop ports
- Converts to standard 5.5 x 2.1mm female jack for common chargers
- 10 cm cable keeps desk tidy and reduces strain
- Compact, lightweight design slips into any bag pocket
- Brand-new build ensures reliable power delivery
Connector Conversion
This adapter converts a 4.5 x 3.0 mm bent male barrel plug to a 5.5 x 2.1 mm female barrel jack. It enables power compatibility between laptop supplies and devices using the larger connector standard. The short 10 cm cable keeps the link tidy on a desk or in a bag. Builders needing a different tip size or a longer reach cannot use this unit.
Passive Thermal Profile
As a passive cable assembly, the adapter generates no heat and produces zero acoustic noise during normal operation. Power draw is limited to the connected supply and load with no active circuitry added. The compact moulded housings add negligible bulk to the charging setup.
Sustained Load Behaviour
Under continuous use the copper conductors maintain steady conductivity without active cooling requirements. Voltage drop remains proportional to the total circuit length and the supply's own regulation. The fixed 10 cm length prevents excess resistance that longer cables would introduce.
Highlights
- Bent 4.5 x 3.0mm male plug fits tight laptop ports
- Converts to standard 5.5 x 2.1mm female jack for common chargers
- 10 cm cable keeps desk tidy and reduces strain
- Compact, lightweight design slips into any bag pocket
- Brand-new build ensures reliable power delivery
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 4.5 x 3.0mm bent male plug to my laptop's power port?
Align the bent male connector with the laptop's 4.5 x 3.0mm DC input and push straight in until fully seated; the right-angle shape reduces strain on the port.
Will the 5.5 x 2.1mm female jack wear out from repeated charger swaps?
The female jack is rated for standard mating cycles; avoid side loads on the 10cm cable to prevent premature loosening of the centre pin contact.
What is the maximum continuous current the 10cm cord can handle before voltage drop becomes an issue?
The short 10cm length minimises resistance, but the 5.5 x 2.1mm interface typically supports up to 5 A; sustained loads near that limit will cause measurable voltage drop.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
