We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal power supply unit with 6+6+4 pin connector visible

Vszerda

Vszerda 320W power adapter 6+6+4pin for HP MT 6000 6005 6200 6300 8000 8200 Z200

SKU CH-1DS0-GKD0V

320 W replacement PSU with 6+6+4-pin connector for HP 6000, 6005, 6200, 6300, 8000, 8200 and Z200 micro-tower desktops

  • 320W output powers compatible HP micro-tower workstations
  • 100-240V input works worldwide without a voltage switch
  • 6+6+4pin connector matches original HP PSU layout
  • Replaces HP part numbers 503377-001 503378-001 and others
  • Fits HP 6000 6200 6300 8000 8200 Z200 MT series

320W replacement for HP micro-tower workstations

This 320W power adapter replaces the original unit in HP 6000, 6200, 6300, 8000, 8200 and Z200 micro-tower systems. It matches the 6+6+4pin connector layout used by these chassis. The unit accepts 100-240V input at 50-60Hz for worldwide mains compatibility.

Continuous 320W delivery through the 6+6+4pin

The adapter is rated for a maximum continuous output of 320W across its combined rails. Each unit is tested before shipment to verify stable operation under sustained load. The 6+6+4pin configuration supplies the motherboard and peripheral power paths required by the listed HP platforms.

6+6+4pin connector decides fit for HP MT chassis

The physical 6+6+4pin connector is the single specification that determines whether this adapter fits your system. Verify the part number on your existing supply against the compatible list including 503377-001, 503378-001 and 702306-002 before ordering. Builders needing a different pin arrangement or higher wattage cannot use this unit.

Highlights

  • 320W output powers compatible HP micro-tower workstations
  • 100-240V input works worldwide without a voltage switch
  • 6+6+4pin connector matches original HP PSU layout
  • Replaces HP part numbers 503377-001 503378-001 and others
  • Fits HP 6000 6200 6300 8000 8200 Z200 MT series

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the 320W Vszerda adapter draw from the wall when the HP workstation runs all day?

The unit accepts 100-240V at 4A, 50-60Hz, so continuous draw depends on the load placed on the 320W output.

Which HP chassis and part numbers must the buyer already have for the 6+6+4pin connector to fit?

It replaces HP part numbers 503377-001, 503378-001, 702306-002, 702454-001, 508153-001, 508154-001, 611483-001, 613746-001 and 611484-001 in compatible MT and Z200/Z210 models.

Will the 320W unit work alongside the original motherboard and CPU in an HP 8000 or 8200 MT without changes?

Yes, it matches the 6+6+4pin pinout used by the 8000, 8080, 8100, 8180, 8200, 8280, 8300 and 8380 MT series motherboards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.