We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 3.5 inch IDE male to 22 pin SATA adapter board with Molex power cable

Vszerda

Vszerda 3.5" IDE to 2.5" 3.5" SATA Adapter 40Pin to 22Pin with Molex Power Cable

SKU CH-4441-DSP3Q

Connects 2.5" or 3.5" SATA drives to a 40-pin IDE interface with included Molex power cable

  • Connect 2.5" or 3.5" SATA drives to 40-pin IDE ports
  • Includes Molex 4-pin to floppy power cable for drive power
  • 22-pin SATA interface supports both data and power connections
  • New adapter bridges legacy IDE systems with modern SATA storage

Connect legacy IDE systems to SATA drives

This adapter bridges a 40-pin IDE interface to a 22-pin SATA connection, letting you install a 2.5-inch or 3.5-inch SATA SSD or hard drive into a desktop or industrial machine that only accepts 3.5-inch IDE devices. It is aimed at technicians maintaining older workstations, embedded boards or retro builds that still rely on parallel ATA.

Molex power and direct board mounting

A 4-pin Molex to floppy power cable supplies the necessary voltage, so no extra power adapters are required. The compact PCB plugs straight into the IDE header and secures the SATA drive in the standard 3.5-inch bay, keeping cabling tidy and the installation reversible for future upgrades.

Highlights

  • Connect 2.5" or 3.5" SATA drives to 40-pin IDE ports
  • Includes Molex 4-pin to floppy power cable for drive power
  • 22-pin SATA interface supports both data and power connections
  • New adapter bridges legacy IDE systems with modern SATA storage

Specifications

No published specifications for this item yet.

Questions about this item

What SATA speed does the 22-pin connector support?

The adapter passes the SATA signal through without changing its speed, so the drive runs at its native SATA rate.

What clearance is needed to install the 40-pin IDE plug and Molex power cable?

The 40-pin male IDE connector and 4-pin Molex plug require standard 3.5-inch drive bay depth and side clearance for cable routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.