We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 3.5 inch hot-swap drive caddy with silver lever and label 651314-001

Vszerda

Vszerda 3.5" HDD Caddy Tray Gen8/Gen9 SATA/SAS 651314-001

SKU CH-W6W4-SXQWP

Hot-swap 3.5-inch SATA/SAS drive caddy for HP Gen8/Gen9 ProLiant servers

  • Fits HP ProLiant Gen8 and Gen9 servers
  • Supports both SATA and SAS 3.5" drives
  • Hot-swap tray enables quick drive changes
  • Compatible with DL360, DL380 and DL388 models
  • Part number 651314-001 matches original HP caddy

Purpose and compatibility

This Vszerda 3.5" HDD caddy tray accepts SATA and SAS hard drives for hot-swap bays in HP ProLiant Gen8 and Gen9 servers. It fits models including DL380, DL360, DL388 G9, BL460c, ML350p and the SL230s and SL250s families. System builders adding bulk storage to these platforms will find the correct carrier. Buyers who need a tray for Gen10 or later servers cannot use this part.

Thermals noise and power

The tray is a passive mechanical carrier with no fan, motor or electronics of its own. It adds no audible noise and draws no power beyond the drive installed inside it. Airflow through the server chassis passes the drive unimpeded. Thermal performance depends entirely on the host system cooling and the drive selected.

Deciding specification

The single specification that determines fit is the Gen8 and Gen9 hot-swap carrier form factor with SATA and SAS connector support. If the target server uses this generation of ProLiant drive bay the tray will seat and lock correctly; otherwise it will not engage the backplane. Verify the server model against the listed ProLiant series before purchase.

Highlights

  • Fits HP ProLiant Gen8 and Gen9 servers
  • Supports both SATA and SAS 3.5" drives
  • Hot-swap tray enables quick drive changes
  • Compatible with DL360, DL380 and DL388 models
  • Part number 651314-001 matches original HP caddy

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the tray into a DL380 G9 server, and what step is often missed?

Slide the 3.5" caddy into the hot-swap bay until the latch clicks; the step people miss is fully seating the SATA/SAS connector before locking the handle.

What maintenance or replacement will this caddy need over time?

The plastic latch spring can fatigue after repeated swaps; keep a spare 651314-001 tray on hand for quick replacement.

What limit appears first during sustained drive activity in a DL360 G8?

The tray itself has no thermal or electrical limit; the bottleneck will be the drive or the server backplane, not the caddy.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.