We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 240W power supply unit with three multi-pin connectors

Vszerda

Vszerda 240W Power Adapter PS-4241-1HA HP ProDesk 400 600 800 G1 G2 SFF

SKU CH-3NB2-HFAQE

240 W replacement power supply for HP ProDesk 400, 600 and 800 G1/G2 SFF units, accepting 100–240 V input and providing 6-pin plus 4-pin connectors

  • Powers HP ProDesk 400 600 800 G1 G2 SFF with 240W output
  • Replaces 200W units for higher headroom in the same chassis
  • Accepts 100-240V 50-60Hz input for worldwide use
  • Supplies power through three keyed connectors: P1-6Pin, P2-6Pin, P3-4Pin
  • Matches a wide list of HP part numbers including 702307-001 and 751884-001

Vszerda 240W Replacement Power Supply

This Vszerda 240W unit replaces the original PS-4241-1HA adapter in HP ProDesk 400 600 800 G1 G2 SFF chassis. It also covers systems originally shipped with a 200W supply. The package includes one power supply unit ready for installation.

Fits HP ProDesk SFF with three keyed connectors

The adapter delivers power through P1-6Pin, P2-6Pin and P3-4Pin headers that match the motherboard layout of the listed ProDesk models. A 100-240V~, 50-60Hz 3.5A input allows worldwide mains compatibility without a voltage switch. No extra cables or adapters are required for the supported part numbers.

Sustained 240W output under continuous load

The DC side is rated for a maximum of 240W continuous power, not a peak figure, so the rail stays stable during long work sessions. Builders needing more than 240W or a different connector pin-out should look elsewhere. The unit is new and carries no legacy wear from prior deployment.

Highlights

  • Powers HP ProDesk 400 600 800 G1 G2 SFF with 240W output
  • Replaces 200W units for higher headroom in the same chassis
  • Accepts 100-240V 50-60Hz input for worldwide use
  • Supplies power through three keyed connectors: P1-6Pin, P2-6Pin, P3-4Pin
  • Matches a wide list of HP part numbers including 702307-001 and 751884-001

Specifications

No published specifications for this item yet.

Questions about this item

How long can the 240W adapter run at full load before thermal protection activates?

The unit delivers a maximum of 240W continuously from a 100-240V 50-60Hz 3.5A input. Its internal fan and heatsink are designed to sustain that output inside the HP ProDesk 400 600 800 G1 G2 SFF chassis without tripping protection.

What noise level and heat output should I expect when the PS-4241-1HA powers a workstation all day?

The supply uses a built-in fan that spins only as fast as needed to keep internal temperatures safe at 240W. Under typical office loads the fan runs quietly; under sustained heavy load it increases speed to move more air through the heatsink.

Which existing cables or motherboard headers must my HP ProDesk already have for this PS-4241-1HA to connect?

Your ProDesk 400 600 800 G1 G2 SFF must provide the matching P1 6-pin, P2 6-pin and P3 4-pin headers on the motherboard. The adapter plugs directly into those three connectors; no extra cables or adapters are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.