We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter cable with 24-pin ATX plug and two 6-pin connectors

Vszerda

Vszerda 24-Pin to 6-Pin ATX PSU Adapter Cable 30cm for HP Z230 Z220 SFF

SKU CH-JBGF-THYXN

Connects a standard 24-pin ATX supply to HP Z230 and Z220 SFF motherboards using an 18 AWG cable 30 cm long

  • Powers HP Z230 and Z220 SFF boards from a standard ATX supply
  • 30 cm 18 AWG copper cable keeps routing tidy inside small chassis
  • 24-pin ATX to 6-pin PCIe plus 6-pin needle connector matches proprietary HP pinout
  • 41 g lightweight build adds negligible strain to motherboard header
  • Enables reuse of idle standard PSUs without proprietary HP power units

HP Z230/Z220 SFF Power Adapter

This 30 cm adapter cable converts a standard 24-pin ATX connector to the 6-pin power input found on HP Z230 and Z220 small-form-factor motherboards. It uses 18 AWG copper wire rated to the 1007 specification. The assembly weighs 41 g and includes a 6-pin needle-line port alongside the primary PCIe-style connector. It lets builders reuse an ordinary ATX power supply in these workstations.

Builders Reusing ATX Units in HP SFF Chassis

The cable is made for integrators fitting a commodity power supply into an HP Z230 or Z220 SFF workstation where the board expects a 6-pin header. It does not suit systems that retain the proprietary HP power supply or motherboards requiring a different pin count or keying. Buyers needing longer reach for full-tower layouts or alternative connector shapes should look elsewhere.

30 cm Length Fits SFF Routing Only

The fixed 30 cm length is the critical dimension that determines compatibility with the tight internal routing of the Z230 and Z220 SFF chassis. Measure the path from your ATX supply to the motherboard header before ordering; a longer run will require a different cable.

Highlights

  • Powers HP Z230 and Z220 SFF boards from a standard ATX supply
  • 30 cm 18 AWG copper cable keeps routing tidy inside small chassis
  • 24-pin ATX to 6-pin PCIe plus 6-pin needle connector matches proprietary HP pinout
  • 41 g lightweight build adds negligible strain to motherboard header
  • Enables reuse of idle standard PSUs without proprietary HP power units

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 18AWG 24-pin to 6-pin adapter cable to my HP Z230 SFF motherboard?

Plug the 24-pin connector into a standard ATX power supply and insert the 6-pin needle-line port into the motherboard's 6-pin power header; the 30 cm length fits the SFF chassis without strain.

Will the 18AWG copper wire and plastic connectors need replacement over time?

The 1007-18AWG copper conductors and moulded plastic housings are rated for continuous operation and do not require scheduled replacement under normal use.

What power limit does the 18AWG wire hit first during sustained loads?

The 18AWG gauge determines the maximum safe current; sustained draws above its ampacity will cause voltage drop and heating before any other component reaches its limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.