We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 3.0 Type B panel mount female to male cable, 1.6 ft, plastic body with mounting screws

Vszerda

Vszerda 20" USB 3.0 B Female to B Male Panel Mount Cable Blue

SKU CH-VFEP-MZ4T8

Panel-mount USB 3.0 B female-to-male extension cable, 20 inch length, 5 Gbps data rate with screw-secure installation

  • TypeUSB
  • Connector TypeUSB Type B
  • ColorBlue
  • Cable Length1.6 ft
  • Length1.6 ft
  • Connector Number9
  • Secure panel-mount installation with screws for stable connections
  • SuperSpeed USB 3.0 transfers data at up to 5 Gbps
  • Backward compatible with USB 2.0 and 1.1 devices
  • 20-inch length suits compact internal or external routing
  • Plug-and-play design works with laptops and desktops

Panel-Mount USB 3.0 B Extension

This 20-inch cable adds a USB 3.0 Type B female port to a panel or enclosure. The male Type B plug connects to a host or hub, while the screw-mounted female end stays fixed for repeated docking. It targets technicians and integrators who need a durable, front-access port for printers, scanners or external drives.

Upgrade From USB 2.0 Cabling

The link runs at 5 Gbps, roughly 10 times the throughput of USB 2.0, so large scan jobs or disk transfers finish noticeably quicker. The jump is worth it whenever the peripheral and host both support USB 3.0 and the cable length stays within the 1.6 ft spec. Legacy USB 2.0 devices still work, but they will not reach the higher rate.

Length And Connector Limits

At 1.6 ft the cable suits only short internal or panel-to-device runs; longer distances need active repeaters or a different topology. The panel-mount flange requires a cut-out and screw holes, so it cannot be used as a simple inline extender. No power-delivery or alternate-mode signalling is specified, so the link carries only standard USB 3.0 data and bus power.

Highlights

  • Secure panel-mount installation with screws for stable connections
  • SuperSpeed USB 3.0 transfers data at up to 5 Gbps
  • Backward compatible with USB 2.0 and 1.1 devices
  • 20-inch length suits compact internal or external routing
  • Plug-and-play design works with laptops and desktops

Specifications

BrandzdyCGTime
TypeUSB
Connector TypeUSB Type B
ColorBlue
Cable Length1.6 ft
Length1.6 ft
Connector Number9
Connector DetailUSB Type B
Terminal GenderMale-to-Female
Speed5 gigabits_per_second
Apple CompatibleLaptop
ConstructionPlastic
FeaturesData Transfer

Questions about this item

What panel cut-out size does the 20" USB 3.0 B female connector need?

The USB 3.0 Type B panel-mount female connector requires a standard panel cut-out; check the chassis manual for the exact dimensions before drilling.

Which step is most often missed when securing the panel-mount end with screws?

Align the connector flush with the panel, start both mounting screws by hand, then tighten evenly so the blue housing sits square and the seal is uniform.

How often should the 1.6 ft extension be inspected or replaced in a high-cycle printer setup?

Inspect the cable and screw threads every 10 000 mating cycles; replace if the blue jacket shows wear, the Type B pins are bent, or data drops to USB 2.0 speeds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.