We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda USB 2.0 bracket cable with full-profile PCI slot cover and two USB-A ports

Vszerda

Vszerda 2 Port USB 2.0 Bracket Cable 10-pin to 2x USB-A 30cm

SKU CH-AM9N-BYJBW

Converts a motherboard 10-pin USB 2.0 header into two USB-A ports with a full-profile PCI bracket and 30 cm cable length for rear-panel access

  • Converts one internal 10-pin header into two external USB-A ports
  • Full-profile PCI bracket secures the adapter to the rear panel
  • 30 cm cable length reaches most motherboard headers easily
  • USB 2.0 compliant for up to 480 Mbps data transfer
  • Two downstream Type-A female connectors for peripheral connections

Two-Port USB 2.0 Bracket Cable

This Vszerda adapter converts a single motherboard 10-pin USB 2.0 header into two rear-facing USB-A female ports. It fits a full-profile PCI slot bracket for mounting at the back of a desktop case. The 30 cm cable length suits standard ATX board layouts. Builders who need extra external ports for legacy peripherals or front-panel relocation will find it useful.

Installation Notes

Align the 10-pin connector with the motherboard header key and press firmly until seated; the plug is polarised to prevent reverse insertion. Secure the metal bracket to the case rear panel with a screw to avoid strain on the header. A common issue is miscounting header pins — verify the board manual for the correct USB 2.0 10-pin location before connecting.

Compatibility Check

Confirm your motherboard has an available internal USB 2.0 10-pin header; one header is required for the two downstream ports. Ensure a full-profile PCI slot opening is free on the case rear panel for the bracket. The adapter supports data rates up to 480 Mbps per the USB 2.0 specification. Systems lacking a spare 10-pin header or a full-height slot cannot use this cable.

Highlights

  • Converts one internal 10-pin header into two external USB-A ports
  • Full-profile PCI bracket secures the adapter to the rear panel
  • 30 cm cable length reaches most motherboard headers easily
  • USB 2.0 compliant for up to 480 Mbps data transfer
  • Two downstream Type-A female connectors for peripheral connections

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the adapter is functioning at the full 480Mbps after connecting it to the 10-pin header?

Connect a USB 2.0 device to one of the two Type-A ports and verify the operating system enumerates it as a high-speed 480Mbps link.

Which components are included and what must be sourced separately to complete the installation?

The package provides the 30cm 10-pin to dual USB-A cable and a full-profile PCI slot bracket; you must supply a motherboard with an available 10-pin USB 2.0 header and a rear-panel slot.

When should I choose this 30cm, 10-pin version over a different length or pin count?

Select this version when the motherboard header is within 30cm of the rear expansion slot and the board uses a standard 10-pin USB 2.0 header layout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.