Vszerda
Vszerda 2-Pack Firewire to USB Cable for DCR-TRV75E 1.0M
Two 1.0 m FireWire cables connect a Sony DCR-TRV75E camcorder to USB 2.0 at up to 400 Mbit/s
- TypeUSB 2.0
- Connector TypeUSB Type A
- Cable Length1.0
- Length1.0
- Connector Number0
- Connector DetailUSB Type A
- Works only with Sony DCR-TRV75E DV model
- Supports IEEE 1394 rates of 100/200/400 Mbits
- 0 metre copper cable with shock-resistant build
- Male-to-male USB Type A to 4-pin iLink connectors
- Two cables included for backup or multi-device use
Dedicated DCR-TRV75E Link
This two-pack cable connects a Sony DCR-TRV75E camcorder directly to a PC USB port. It is built exclusively for that single model and will not function with any other 1394 or USB device. Each cable measures 1.0 metre and carries a male-to-male USB Type A plug. The copper construction adds shock resistance for regular handling.
Fixed Four-Pin FireWire Interface
The camcorder end uses a 4-pin IEEE 1394 iLink connector that mates only with the DCR-TRV75E DV port. Because the wiring is model-specific, the cable cannot be repurposed for other Sony camcorders, external drives or generic FireWire peripherals. The USB Type A plug inserts into any standard PC port without adapters or driver installation. Shock-resistant sheathing protects the conductors during frequent connect-disconnect cycles.
IEEE 1394 Speed Ceiling
Data moves at up to 400 megabits per second, matching the 100/200/400 Mbits rates defined by the IEEE 1394 standard. The USB 2.0 host interface does not raise this ceiling, so large DV captures are limited by the FireWire link rather than the USB bus. Users needing faster ingest or multi-device FireWire support must use a different capture method.
Highlights
- Works only with Sony DCR-TRV75E DV model
- Supports IEEE 1394 rates of 100/200/400 Mbits
- 0 metre copper cable with shock-resistant build
- Male-to-male USB Type A to 4-pin iLink connectors
- Two cables included for backup or multi-device use
Specifications
| Brand | chenyang |
|---|---|
| Model | CY-CA-037-2PCS |
| Type | USB 2.0 |
| Connector Type | USB Type A |
| Cable Length | 1.0 |
| Length | 1.0 |
| Connector Number | 0 |
| Connector Detail | USB Type A |
| Terminal Gender | Male-to-Male |
| Speed | 400 megabits_per_second |
| Construction | Copper |
| Features | shock-resistant |
Questions about this item
What IEEE 1394 transfer rates does the cable support for the DCR-TRV75E?
It supports IEEE 1394 transfer rates of 100, 200 and 400 megabits per second.
What connector ends are required to fit the DCR-TRV75E and the PC?
The cable has a USB Type A male connector for the PC and a 4-pin iLink male connector for the camcorder.
How is the cable connected and what step is often missed?
Plug the 4-pin end into the camcorder DV port and the USB Type A end into the PC; the camcorder must be set to DV output mode for the link to activate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



