We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two beige hybrid fiber adapters, FC male to SC female, ceramic sleeves

Vszerda

Vszerda 2-Pack FC/UPC Male to SC/UPC Female Hybrid Adapter Single Mode 9/125um

SKU CH-46Q2-0D0RW

Two single-mode 9/125 µm hybrid adapters connect FC/UPC male to SC/UPC female with .2 dB insertion loss, 50 dB return loss, and 1000-cycle durability

  • TypeFiber Optic
  • Connector NumberNo Plug
  • Low insertion loss of .2 dB at 1310 nm and 1550 nm
  • High return loss of 50 dB for clean signal reflection
  • Wide operating range from -40 °C to 95 °C
  • Durable ceramic sleeve rated for over 1000 mating cycles
  • Connects FC patch cables to SC equipment and visual fault locators

FC/UPC to SC/UPC hybrid adapter

This two-pack provides FC/UPC male to SC/UPC female hybrid adapters for single-mode 9/125 µm fiber. Each unit connects an FC patch cable to an SC patch cable or test instrument. The ceramic-and-metal sleeve withstands over 1000 mating cycles and operates from -40 °C to +95 °C.

Verify connector gender and polish type

Confirm your existing patch cables use FC/UPC male and SC/UPC female connectors with single-mode 9/125 µm fiber. The adapters are wavelength-specific for 1310 nm and 1550 nm, so mismatched polish or multimode fiber will increase insertion loss beyond the rated 0.2 dB.

Enables direct instrument connection

The hybrid interface lets you plug an FC-terminated cable straight into an SC-port optical power meter or visual fault locator without a separate patch cord. This reduces link loss to 0.2 dB and maintains 50 dB return loss for accurate continuity checks and power measurements.

Highlights

  • Low insertion loss of .2 dB at 1310 nm and 1550 nm
  • High return loss of 50 dB for clean signal reflection
  • Wide operating range from -40 °C to 95 °C
  • Durable ceramic sleeve rated for over 1000 mating cycles
  • Connects FC patch cables to SC equipment and visual fault locators

Specifications

BrandPoyiccot
TypeFiber Optic
Connector NumberNo Plug

Questions about this item

What comes in the 2-pack and do I need to buy any cables separately?

The pack contains two FC/UPC male to SC/UPC female hybrid adapters. You will need your own FC and SC patch cables to connect them.

Which adapter version should I choose for single-mode 9/125 µm fiber?

This model is built for single-mode 9/125 µm fiber with UPC polish on both ends, covering the 1310 nm and 1550 nm wavelengths.

What does the 0.2 dB insertion loss mean when I use the adapter in a live link?

At 1310 nm and 1550 nm the adapter adds only 0.2 dB loss while return loss stays at 50 dB, so signal degradation is minimal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.