We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90-degree 12VHPWR adapter cable with dual 8-pin connectors to 16-pin plug, 60cm length

Vszerda

Vszerda 12VHPWR 90 Degree Adapter Type B Dual 8 Pin to 16 Pin 600W 60cm

SKU CH-4WNM-GWYQ5

A 60 cm 90-degree adapter converts dual 8-pin PCIe cables to a single 12VHPWR connector for RTX 3090 Ti, 4070 Ti, 4080 and 4090 graphics cards using Corsair Type B power supplies.

  • 90-degree connector protects GPU port and side-panel clearance
  • 16 AWG tinned copper carries up to 600 W for RTX 3090 Ti, 4070 Ti, 4080, 4090
  • Dual 8-pin PCIe to 16-pin 12VHPWR simplifies PSU hookup
  • PCIe 5.0 rated for modern high-power graphics cards
  • 60 cm length gives flexible routing inside the case

Corsair-Only 12VHPWR Adapter

This 90-degree Type B adapter connects dual 8-pin PCIe cables from a Corsair power supply to the 16-pin 12+4 connector on RTX 3090 Ti, 4070 Ti, 4080 and 4090 graphics cards. It is built exclusively for Corsair PSUs and will not work with other brands. The 60 cm length gives routing flexibility inside the case.

16 AWG Wire and Right-Angle Plug

The power leads use 16 AWG tinned copper rated for 600 W, with alloy copper terminals for stable current delivery. The 90-degree 16-pin head reduces strain on the GPU socket and cable, while creating extra clearance between the card and the side panel for tighter builds.

Replaces Straight 12VHPWR Cables

Builders upgrading to a PCIe 5.0 graphics card from a standard 8-pin setup can use this adapter instead of a native 12VHPWR cable, provided the PSU is a Corsair unit. The right-angle design makes the swap worthwhile when space behind the GPU is limited or when a straight connector would press against the glass.

Highlights

  • 90-degree connector protects GPU port and side-panel clearance
  • 16 AWG tinned copper carries up to 600 W for RTX 3090 Ti, 4070 Ti, 4080, 4090
  • Dual 8-pin PCIe to 16-pin 12VHPWR simplifies PSU hookup
  • PCIe 5.0 rated for modern high-power graphics cards
  • 60 cm length gives flexible routing inside the case

Specifications

No published specifications for this item yet.

Questions about this item

Does the PCIe 5.0 12VHPWR adapter carry the full 600 W rating?

The 16 AWG conductors are rated for 600 W, matching the 12VHPWR specification for RTX 4090 and similar GPUs.

What clearance does the 90 degree plug need behind the graphics card?

The right-angle 12+4 pin head points sideways, so measure from the card edge to the side panel; it suits tight builds with wide cards.

How do I connect the dual 8 pin side to a Corsair Type B supply without crossing the sense wires?

Plug each 8 pin into the marked Type B ports on the Corsair unit; the adapter wiring is fixed for that pinout only.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.