We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sleeved 12VHPWR 16-pin to four 8-pin PCIe 5.0 90-degree adapter cable 5.9-inch

Vszerda

Vszerda 12VHPWR 16-pin GPU cable to 4x 8-pin PCIe 5.0 90° sleeved adapter 5.9-inch Type A

SKU CH-AKV7-R3S14

A 90-degree sleeved adapter converts a 16-pin 12VHPWR connector into four 8-pin PCIe 5.0 plugs for RTX 4090, 4080, 4070Ti and 3090Ti cards, measuring 5.9 inches

  • 90° right-angle design eases routing in tight cases
  • 12VHPWR 16-pin connector links to four 8-pin PCIe 5.0 sources
  • Sleeved 5.9-inch length reduces clutter near the GPU
  • Compatible with RTX 4090 4080 4070Ti 3090Ti cards

12VHPWR 16-pin to 4×8-pin adapter

This sleeved cable converts a single 12VHPWR 16-pin connector into four 8-pin PCIe 5.0 plugs. The 90-degree angle eases routing behind graphics cards such as the RTX 4090 4080 4070Ti 3090Ti. Length is 5.9-inch Type A.

Thermals noise and power

The passive cable adds no active cooling or noise. Power delivery follows the PCIe 5.0 specification across each 8-pin branch. Builders needing a native 12VHPWR power supply or a different cable length should look elsewhere.

Highlights

  • 90° right-angle design eases routing in tight cases
  • 12VHPWR 16-pin connector links to four 8-pin PCIe 5.0 sources
  • Sleeved 5.9-inch length reduces clutter near the GPU
  • Compatible with RTX 4090 4080 4070Ti 3090Ti cards

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 90° 12VHPWR connector on my RTX 4090 so the 5.9-inch sleeved tails reach the PSU without strain?

Align the 16-pin plug with the card's native socket, press straight in until the latch clicks, then route each 8-pin tail along the motherboard tray — the right-angle bend keeps the cable flush against the PCB so the short 5.9-inch length does not pull on the connector.

When should I replace the 4×8-pin PCIe 5.0 extension if I run an RTX 4080 at full load daily?

Inspect the sleeved wires and 12+4-pin contacts every six months; replace the adapter if you see discolouration, melted insulation or loose crimps, because the 90° bend concentrates heat at the connector during sustained high-current draw.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.