We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved USB-A cable splitting to two fan connectors, 24-inch length

Vszerda

Vszerda 12V Step-Up USB to Dual Fan Adapter Cable 24-inch (60cm) Black Sleeved

SKU CH-XB7V-93CWH

Powers two 3-pin or 4-pin fans at full 12V speed from a single USB-A port using a built-in step-up circuit

  • TypeUSB
  • Connector TypeUSB Type A
  • ColorBlack
  • Cable Length55.0 centimeters
  • Length55.0 centimeters
  • Connector Number4
  • Powers 3-pin and 4-pin fans at full 12 V speed from a USB port
  • Built-in step-up circuit converts 5 V USB power to 12 V at 0.4 A
  • 24-inch (60 cm) braided cable with all-black connectors for a clean install
  • Works with any device that has a USB Type-A output such as consoles or routers
  • RoHS-compliant construction with high-density black nylon sleeving for durability

Universal USB Fan Power Adapter

The Vszerda cable powers two 3-pin or 4-pin PC cooling fans from a single USB Type-A port. It suits builders who need extra airflow inside a chassis or owners of consoles, routers and AV gear that only offer USB power. The 24-inch length reaches most internal fan headers without strain. The black braided sleeve keeps the installation tidy.

Integrated 12V Step-Up Module

A built-in booster converts the standard 5V USB supply to 12V at 0.4A maximum, letting connected fans spin at full rated speed. This removes the voltage drop that limits typical USB-powered fans. The circuit also works with PWM controllers and fan hubs, so speed control remains available when the host device supports it.

Dual 3-Pin/4-Pin Output Connectors

The adapter terminates in four female headers, two per fan, accepting both 3-pin and 4-pin plugs. Buyers who need more than two fans or a higher current budget than 0.4A total cannot use this cable. The fixed USB Type-A plug also means the host must supply standard USB power without negotiation.

Highlights

  • Powers 3-pin and 4-pin fans at full 12 V speed from a USB port
  • Built-in step-up circuit converts 5 V USB power to 12 V at 0.4 A
  • 24-inch (60 cm) braided cable with all-black connectors for a clean install
  • Works with any device that has a USB Type-A output such as consoles or routers
  • RoHS-compliant construction with high-density black nylon sleeving for durability

Specifications

BrandCRJ Electronics
TypeUSB
Connector TypeUSB Type A
ColorBlack
Cable Length55.0 centimeters
Length55.0 centimeters
Connector Number4
Connector DetailUSB Type A
Terminal GenderMale-to-Female
Speed0.4 megabits_per_second
FeaturesBraided

Questions about this item

Will the step-up circuit need replacement if I run two fans continuously?

The built-in 12V step-up circuit is integrated into the cable assembly and rated for 0.4A maximum output; no separate module is user-replaceable.

What limits total fan speed when both headers are used at once?

The shared 0.4A current cap from the USB 5V source splits between the two 3-pin or 4-pin connectors, so combined draw cannot exceed that figure.

How much heat does the booster generate during all-day operation?

The voltage booster is embedded in the connector housing and designed for continuous 0.4A load; the black nylon sleeving dissipates warmth without active cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.