We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular hub with 16 PWM and 16 ARGB ports plus dual SATA 15pin power connectors

Vszerda

Vszerda 12V 4Pin PWM & 5V 3Pin ARGB 2-in-1 16 Way Hub with SATA 15Pin Power - Black internal power cable

SKU CH-RBQZ-C94RS

A 16-way hub combines 12V 4-pin PWM fan control and 5V 3-pin ARGB lighting sync, powered by dual SATA 15-pin connectors

  • Connect up to 16 PWM fans and ARGB devices simultaneously
  • Dual SATA 15-pin power reduces motherboard load and heat
  • Built-in chipset runs 16 ARGB effects without motherboard sync
  • Magnetic standoffs secure hub inside steel chassis easily
  • PMMA case protects circuitry while keeping wiring tidy

16-Way ARGB and PWM Hub

The Vszerda 2-in-1 hub combines a 12V 4-pin PWM fan controller with a 5V 3-pin addressable RGB splitter. It provides sixteen ports for each standard, allowing builders to connect multiple fans and LED strips from a single point. The unit draws power through dual SATA 15-pin connectors, removing the load from the motherboard headers. Magnetic standoffs secure the PMMA-cased PCB inside a steel chassis.

Sustained Load Behaviour

Powered directly by the PSU via SATA, the hub delivers consistent current to all sixteen fan headers without stressing the motherboard PWM circuit. The integrated RGB controller chip maintains synchronised lighting effects across every connected ARGB device during continuous operation. If the motherboard lacks a 5V 3-pin header, the onboard chipset runs sixteen preset lighting patterns automatically. Manual control is also supported for static colour or speed settings.

Interface Practical Limits

The ARGB ports accept only 5V 3-pin addressable devices; connecting 12V 4-pin RGB components will cause damage. Synchronisation across all sixteen channels requires a motherboard 5V 3-pin ARGB header; without it, the hub operates in standalone mode with its built-in effects. The SATA power connectors limit total current to the PSU's SATA rail rating, so very high-wattage fan arrays may exceed the available power budget.

Highlights

  • Connect up to 16 PWM fans and ARGB devices simultaneously
  • Dual SATA 15-pin power reduces motherboard load and heat
  • Built-in chipset runs 16 ARGB effects without motherboard sync
  • Magnetic standoffs secure hub inside steel chassis easily
  • PMMA case protects circuitry while keeping wiring tidy

Specifications

No published specifications for this item yet.

Questions about this item

Does the hub draw enough current through its SATA 15-pin connectors to run 16 fans continuously without overheating?

Power is supplied from the PSU via dual SATA 15-pin cables, offloading the motherboard and keeping its load and heat low even with all 16 fans spinning.

What motherboard headers are required to control both the PWM fans and the ARGB lighting?

One 12 V 4-pin PWM header for fan speed and one 5 V 3-pin addressable RGB header for lighting sync.

Will my older 12 V 4-pin RGB strips work if I plug them into the 5 V 3-pin ARGB ports?

No. The ARGB ports are 5 V 3-pin addressable only; connecting 12 V RGB devices can damage them.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.