Vszerda
Vszerda 12 V DC power connector 5.5 mm × 2.1 mm 5 male 5 female audio adapter
Ten screw-terminal barrel plugs and jacks connect 12 V LED strips, cameras or solar gear without soldering
- Solder-free installation with single-screw terminals for quick setup
- Secure screw-lock connection prevents loosening or poor contact
- Standard 5.5 mm × 2.1 mm barrel size fits common 12 V devices
- Five male and five female plugs included for versatile wiring
- Suitable for LED strips, CCTV cameras and outdoor power connections
Screwable 12 V DC barrel connectors
This pack supplies five male and five female 5.5 mm × 2.1 mm plugs for 12 V DC power distribution. They suit installers wiring LED strips, CCTV cameras or outdoor security equipment. Each connector uses screw terminals so no soldering is required. The parts arrive new and ready for immediate use.
Solderless screw terminals and rugged housing
A standard slotted screwdriver is the only tool needed to clamp wires in the metal screw terminals. The concave socket design grips the mating plug firmly, resisting vibration and accidental disconnection. Bodies are moulded from sturdy plastic with metal contacts for reliable current flow. This construction simplifies field repairs and seasonal lighting setups.
Replaces soldered or crimped barrel plugs
The kit upgrades installations that previously needed a soldering iron or specialised crimp tool. It is worth choosing when a quick, tool-light connection is preferred and the 5.5 mm × 2.1 mm format matches the existing equipment. Buyers needing a different inner diameter or a locking collar will need a different connector series.
Highlights
- Solder-free installation with single-screw terminals for quick setup
- Secure screw-lock connection prevents loosening or poor contact
- Standard 5.5 mm × 2.1 mm barrel size fits common 12 V devices
- Five male and five female plugs included for versatile wiring
- Suitable for LED strips, CCTV cameras and outdoor power connections
Specifications
No published specifications for this item yet.
Questions about this item
Does the 5.5 mm × 2.1 mm barrel jack carry 12 V DC without soldering?
Yes, the screw terminals accept stripped wire and secure it with a single slotted screw, so no soldering is required for a 12 V DC connection.
What cable diameter fits the screw terminals on these connectors?
The terminals accept typical low-voltage power cable used for LED strips and CCTV cameras; strip the insulation, insert the conductor, and tighten the screw.
Which installation step causes loose contacts if skipped?
Failing to fully tighten the terminal screw after inserting the wire leaves the connection loose; always verify the screw is snug before powering the circuit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



