Vszerda
Vszerda 10ft SMA Male to Female RG174 Cable 50 Ohm network antenna
A 10ft RG174 coaxial cable with SMA male-to-female connectors extends Wi-Fi antennas for routers, bridges or FPV gear while maintaining 50 Ohm impedance
- ColorBlack
- Flexible antenna placement with 10ft RG174 cable
- Low-loss 50 Ohm impedance maintains signal quality
- Standard SMA male to female connector compatibility
- Suitable for WiFi routers, bridges and FPV antennas
- Not for TV use — verify SMA connector type
SMA Male-to-Female Antenna Extension
This 10 ft RG174 coaxial cable carries a 50 ohm impedance and uses standard SMA connectors. It connects Wi-Fi routers, bridges, access points, PCI wireless cards, security cameras or FPV antennas to external antennas. The low-loss cable lets you reposition the antenna for better signal without moving the host device.
Installers Repositioning Antennas
Suits anyone who needs to relocate an SMA-equipped antenna up to 10 ft away from the radio. Not for television antenna systems or devices that use reverse-polarity SMA, F-type, N-type or other connector styles. Buyers whose equipment lacks a standard SMA jack should look at a different cable assembly.
Sustained Signal Path Performance
The RG174 construction maintains its 50 ohm characteristic impedance over the full length during continuous transmission. Insertion loss remains stable when the cable is routed through walls or ceilings for permanent installations. No degradation occurs from repeated flexing at the connector junctions under normal handling.
Highlights
- Flexible antenna placement with 10ft RG174 cable
- Low-loss 50 Ohm impedance maintains signal quality
- Standard SMA male to female connector compatibility
- Suitable for WiFi routers, bridges and FPV antennas
- Not for TV use — verify SMA connector type
Specifications
| Brand | CORONIR |
|---|---|
| Color | Black |
Questions about this item
Does my antenna or router need a standard SMA female port to accept the SMA male plug on this 10ft RG174 cable?
Yes, the cable has a standard SMA male connector on one end, so the device you are connecting must provide a standard SMA female jack; it will not mate with RP‑SMA or other connector types.
Will the 50 ohm RG174 cable work with my existing 50 ohm Wi‑Fi antenna and router without impedance mismatch?
The cable is rated at 50 ohms, matching typical Wi‑Fi antennas and routers, so it can be used alongside existing 50 ohm hardware without creating an impedance mismatch.
How can I verify the 10ft SMA male to female RG174 cable is passing signal correctly after I install it?
Check the wireless device’s signal strength or link quality meter before and after connecting the cable; a stable or improved reading shows the extension is functioning as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
