We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular network switch with three RJ45 ports and a USB power cable attached

Vszerda

Vszerda 1000Mbps Ethernet Switch 1 to 2 with USB Power Cable

SKU CH-2EFD-RB611

Splits one gigabit connection into two simultaneous 1000 Mbps ports with plug-and-play USB power

  • Splits one gigabit line into two 1000 Mbps ports
  • Plug and play with included 5 V USB power cable
  • Works with Cat 5e through Cat 8 Ethernet cables
  • Backward compatible with 100 Mbps and 10 Mbps networks
  • Lightweight 0.06 kg module installs anywhere

1-to-2 Gigabit Ethernet Switch

The Vszerda 1000Mbps Ethernet Switch divides a single gigabit connection into two simultaneous gigabit links. It is built for PC, laptop, PS5, Xbox and TV users who need an extra wired port without running new cables. Plug-and-play operation requires no driver installation.

Passive Cooling and USB Power

The module operates silently with no moving parts and draws 5V power through the included USB cable. Normal use adds negligible load to a USB port or charger, keeping thermals and noise at effectively zero while maintaining full 1000Mbps throughput on both outputs.

1000Mbps Per Port Throughput

Each RJ45 port delivers up to 1000Mbps with backward compatibility to 100Mbps and 10Mbps networks. The actual speed is limited by the upstream connection, so buyers whose ISP or local link exceeds 1000Mbps will not gain additional bandwidth from this switch.

Highlights

  • Splits one gigabit line into two 1000 Mbps ports
  • Plug and play with included 5 V USB power cable
  • Works with Cat 5e through Cat 8 Ethernet cables
  • Backward compatible with 100 Mbps and 10 Mbps networks
  • Lightweight 0.06 kg module installs anywhere

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda 1000Mbps Ethernet Switch and what step do people often miss?

Connect the incoming Ethernet cable to the single input port, then link two devices to the output ports. The step people miss is plugging the included USB power cable into a 5V source; without it the switch will not pass traffic.

What maintenance or replacement will this switch need over time?

No moving parts or filters exist inside. The only items that may eventually need replacing are the external Cat 5e through Cat 8 patch cables or the USB power cable if the connector wears out.

What limit appears first when both ports run at full load for long periods?

Each port is capped at 1000 Mbps and the combined throughput cannot exceed the single 1000 Mbps uplink, so sustained heavy traffic on both devices will hit that aggregate bandwidth ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.