We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 10-port SATA III PCIe 3.0 x1 card with low-profile bracket

Vszerda

Vszerda 10 Port SATA III PCIe 3.0 x1 JMB582 Low Profile Bracket SY-PEX40167

SKU CH-RQFQ-8J3WP

Adds ten SATA III ports over a single PCIe 3.0 x1 lane using a JMB582 controller with hot-plug support and 850 MB/s peak throughput

  • Add 10 SATA III drives through one PCIe 3.0 x1 slot
  • JMB582 chipset enables 850 MB/s maximum sequential throughput
  • Port Multiplier support expands drive count per port
  • Hot-plug capability allows drive changes without shutdown
  • SATA Partial and Slumber states reduce idle power draw

Ten SATA III ports on one slot

The Vszerda SY-PEX40167 adds ten 6Gb/s SATA III connections through a single PCIe 3.0 x1 lane using the Micron JMB582 chipset. It is built for storage-heavy workstations, NAS builds or media servers that need many mechanical or solid-state drives without occupying multiple expansion slots. AHCI compliance ensures broad operating-system support from Windows XP through Windows 10, macOS and Linux without driver installation.

Low-profile bracket and hot-plug support

A low-profile bracket is included so the card fits slim chassis or standard-height cases alike. Port Multiplier capability lets each connector address multiple drives through an enclosure or backplane, while hot-plug and hot-swap support allow drives to be added or removed without powering down. Staggered spin-up and SATA Partial and Slumber power states reduce peak current draw and idle consumption across large arrays.

Non-RAID upgrade for multi-drive setups

This card replaces motherboard SATA ports when the onboard count is insufficient or when a platform lacks native 6Gb/s support. It upgrades a system limited to four or six drives by delivering ten ports with up to 850 MB/s sequential throughput. The jump is worth it when you need independent AHCI drives for ZFS, software RAID or direct passthrough to virtual machines rather than a hardware RAID controller.

Highlights

  • Add 10 SATA III drives through one PCIe 3.0 x1 slot
  • JMB582 chipset enables 850 MB/s maximum sequential throughput
  • Port Multiplier support expands drive count per port
  • Hot-plug capability allows drive changes without shutdown
  • SATA Partial and Slumber states reduce idle power draw

Specifications

No published specifications for this item yet.

Questions about this item

What PCIe 3.0 x1 bandwidth limit applies to the 10-port SATA III card?

The x1 lane caps total throughput at roughly 850 MB/s across all ten ports.

Which bracket and slot clearance does the SY-PEX40167 require?

A low-profile bracket is included; it fits a standard PCIe x1 slot in low-profile or full-height chassis.

How is the JMB582 card installed and what step is often missed?

Seat the card in a PCIe x1 slot, attach SATA cables, and enable AHCI in BIOS so all ten ports appear.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.