Vszerda
Vszerda 10 pcs 8-pin PCIe to dual 8-pin (6+2) PCIe female to male GPU power cable 260mm
Ten 18 AWG cables from Vszerda split one 8-pin PSU connector into two 6+2-pin GPU plugs at 260 mm each
- 10 cables power multiple GPUs from one PSU
- 18 AWG wire handles high current for mining rigs
- 260 mm length fits full-tower and compact cases
- 6+2 pin male ends work with 6-pin and 8-pin graphics cards
- Female 8-pin plugs directly into standard PSU connectors
Ten-cable kit for multi-GPU builds
This pack supplies ten identical cables, each converting one 8-pin PCIe output from a power supply into two 8-pin (6+2) connectors for graphics cards or mining motherboards. The 18 AWG conductors and 260 mm length suit standard chassis routing.
Suits miners and multi-GPU workstations
Builders running several cards from a limited number of PSU cables gain the extra connectors they need. Systems with only a single graphics card, or PSUs already equipped with enough native 8-pin leads, do not require this adapter set.
One 8-pin female splits into two 8-pin (6+2) males
Each cable carries a single 8-pin female end that plugs into the PSU and two 8-pin (6+2) male ends that accept either 6-pin or 8-pin GPU power inputs. The 10.23 inch / 260 mm reach and 18 AWG wire gauge are the critical specifications to verify against your power supply and card layout.
Highlights
- 10 cables power multiple GPUs from one PSU
- 18 AWG wire handles high current for mining rigs
- 260 mm length fits full-tower and compact cases
- 6+2 pin male ends work with 6-pin and 8-pin graphics cards
- Female 8-pin plugs directly into standard PSU connectors
Specifications
No published specifications for this item yet.
Questions about this item
What is the wire gauge that limits current under sustained load?
Each cable uses 18 AWG wire, which sets the safe continuous current limit for the dual 8-pin (6+2) connectors.
Do the cables add noticeable heat or noise when the rig runs all day?
The cables are passive 18 AWG copper with no active components, so they add no fan noise and only minimal resistive heat under normal GPU loads.
What power-supply connector must the system already have for these to work?
The system needs an available 8-pin PCIe female connector on the power supply for each cable’s female end.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



